To install, it is best to place the cold bearing (overnight in the freezer) in the housing, which has been carefully heated with a blowtorch. Depending on the fit, first find a suitable driver that rests on the outer ring.
Once the bearing is seated, insert the lightly oiled shaft seals.
The grease packing for the bearing should consist of appropriate high-pressure grease. Pack in enough so that the rollers are just visible, but at the same time there is room for the grease when it expands.
Too much or incorrect grease can be pressed out of the oil seals when the engine is hot.

Rate this article now and let us know what you think.
Ball bearing
Inner diameter
28 mm
Outside diameter
42 mm
Width
8 mm
Dimensions
28x42x08mm
 
Matching
Customers also bought