With the reinforced BGM PRO engine silent rubbers supplied in a pair, the chassis gains in directional stability, steering precision and stiffness. The assembly is simple and is ideal, for example, in the course of an engine overhaul.
MOUNTING
Vespa PX80-150, Sprint, VBB, etc.
These models use factory caulked rubbers.
Here, drill out/flex the caulked axle ends. Remove the tube and rubbers from the housing.
Push the new BGM PRO rubbers back into the housing with a little talcum powder.
The rubber for the cylinder side has a pre-mounted plastic stop ring. Do not remove it.
NOTE: Mount the silent rubbers dry, do not grease/oil them. Use talcum powder for easier assembly.
DE | €
