Postage free from 99€ (DE)
High customer satisfaction
DE | €
- Scooter 50-850cc
- Spacer bushings between the fork link and shock absorber by Royal Alloy, for GP, GT, JPS, TG
Genuine Royal Alloy spacer bush for the lower mounting of the front shock absorber to the fork link. The cylindrical metal bush is installed in the connection between the fork link and shock absorber and forms part of the standard front suspension assembly.
With dimensions of 12 x 30 x 15 mm, the spacer bush is designed for the intended installation position. It serves as a defined spacer within the lower shock absorber mounting and allows the individual bush to be replaced without having to replace other components of the assembly.
The fork link is an essential component of the front suspension and provides the connection between the front wheel guide and the shock absorber. Several coordinated mounting components are used at the lower shock absorber mounting point.
The genuine Royal Alloy spacer bush with original part number 0313010008-02-001 forms part of this connection. It is used in the lower shock absorber mounting between the fork link and shock absorber.
Its defined length and central through-hole provide the intended geometry within the mounting assembly. Its dimensions are matched to the associated components and the corresponding bolted connection.
The spacer bush has a continuous cylindrical outer body with a central cylindrical bore. Both end faces are parallel to each other and form broad annular contact surfaces.
Fine concentric machining marks are visible on the end faces. The inner bore also has a uniform metallic surface with visible machining marks.
The outer cylindrical surface is smooth and designed without additional grooves or steps. Narrow machined edges are visible at the transitions between the end faces and the outer circumference.
The silver-coloured metallic finish reflects the functional design of a mechanical mounting component. Its compact cylindrical construction clearly distinguishes it from flat spacer washers or rosette-shaped bushes used at other positions within the shock absorber mounting system.
The spacer bush is used on various Royal Alloy models as part of the lower mounting of the front shock absorber.
In the Royal Alloy spare parts catalogue, the component is listed as “Lower Bushes” or “Bush” with dimensions of 12 x 30 x 15 mm. Exact vehicle compatibility should be checked using original part number 0313010008-02-001.
When working on the front suspension, the spacer bush should be inspected for wear and damage. In particular, the end faces and central bore should be free from significant deformation or damage.
The contact areas on the fork link and lower shock absorber mounting should also be inspected during disassembly. A damaged spacer bush should be replaced with a suitable replacement part.
During reassembly, ensure that the spacer bush and the other mounting components are positioned correctly. The corresponding bolted connection must be installed and tightened according to the manufacturer's specifications.
The genuine Royal Alloy spacer bush 0313010008-02-001 is available as an individual replacement part for repairing the lower shock absorber mounting. Its vehicle-specific dimensions allow the component to be replaced while retaining the original design of the assembly.
