Whether you’re replacing a clutch, overhauling an engine, adjusting the ignition, or working on the suspension and transmission: With the right tools, you can perform repairs on your Vespa or Lambretta with greater precision and while minimizing damage to the parts. BGM PRO and BGM ORIGINAL offer specialized pullers, clutch holders, bearing tools, crankshaft retraction tools, and practical workshop aids for these tasks. The product range includes tools for classic manual-transmission scooters as well as selected accessories for modern Vespa models, mopeds, and automatic scooters. It’s crucial that the tool is compatible with the specific engine and component design.
Anyone looking to remove or disassemble a Vespa clutch often needs more than just a standard socket set. Clutch holders prevent the clutch from rotating when loosening the fasteners, while suitable pullers allow you to carefully remove seized clutches from the shaft. Clutch compressors enable you to safely compress the springs when replacing the clutch linings.
The BGM PRO 5-in-1 Multitool (BGM8819N) is particularly versatile. It combines functions for removing compatible Vespa flywheels and clutches, as well as compressing various Vespa clutches.
For classic manual-transmission scooters, there is also the BGM ORIGINAL clutch compressor, which is designed for compatible small-frame, large-frame, and wide-frame clutches.
Important: For flywheel pullers and clutch tools, the required threads, mounts, and dimensions vary depending on the vehicle and component. The BGM Multitool, for example, uses an M28x1 external thread for compatible flywheels and an M26x1 internal thread for certain small-frame clutches. You should verify these specifications against your engine before purchasing.
Crankshaft
Overhaul During an engine overhaul, the crankshaft, bearings, and other components often need to be removed and reinstalled. Unsuitable tools or improperly applied forces can damage bearing races, shaft seats, and the engine case.
BGM PRO offers special press-in tools and impact mandrels for various Vespa engines. These include tools for the controlled press-in of the crankshaft into the crankcase halves, as well as installation aids for crankshaft, auxiliary shaft, and main shaft bearings.
For work on various ball bearings, the BGM disassembly tool set is available for ball bearings of different dimensions.
The selection depends on the bearing diameter, bearing type, installation position, and the specific engine. During installation, forces should be transmitted via the appropriate bearing ring whenever possible. The specified installation procedures and, if applicable, suitable temperature differentials must also be observed.
BGM offers a variety of tools for Vespa Smallframe and Largeframe models, as well as for classic Wideframe engines. Therefore, a pull-in tool designed for a PX crankshaft is not automatically suitable for every older Vespa.
Specialized tools are also recommended for various repairs on Lambretta LI, LIS, SX, TV, DL, and GP models. This applies particularly to the clutch, crankshaft bearings, engine mounts, and front fork.
The BGM PRO lineup includes, for example, the BGM1220TL clutch compressor. It is designed for compatible Lambretta engines in the LI family as well as for J and Lui models and allows for controlled compression of the clutch during disassembly.
For replacing the engine silent blocks, BGM PRO offers the BGM7950TL installation tool. It facilitates the proper installation of the corresponding engine mounts without unnecessarily damaging the components with unsuitable tools.
Another specialized tool is the BGM PRO front fork spring compressor BGM777TL for classic Lambretta models. It allows you to compress the front fork springs in a controlled manner, for example, when overhauling the fork.
When it comes to Lambretta tools, precise compatibility is particularly important. Therefore, check the model series, engine or fork type, and the components used before ordering a tool.
Timing
A correctly adjusted ignition and verifiable timing are essential for a reliably running two-stroke engine. BGM offers dial indicators, dial indicator holders, angle discs, and matching pointers for this purpose.
A dial indicator can be used to check the piston position to determine top dead center. A degree disc then helps determine the angular positions of the crankshaft and valve timing. A suitable spark tester may also be necessary for dynamic checking of the ignition timing.
The product range includes, for example, the BGM PRO angle disc BGM8809, matching holders and pointers, as well as dial indicators and dial indicator holders from BGM ORIGINAL.
For carburetor work, there are also jet gauges, jet reamers, and special carburetor tools. Care is essential here: Reaming a carburetor jet permanently alters its diameter. For simple cleaning, do not use any tools that could damage the calibrated opening.
Specialized tools also make repairs easier when replacing steering head bearings, working on the front swingarm, or removing brake drums.
BGM PRO offers various headset wrenches for Vespa models, as well as brake drum holders and tools for removing wheel axles and bearings.
A headset wrench must fit the respective groove nut. For brake drum holders, the designs vary depending on, among other things, the vehicle type and wheel construction. Therefore, pay close attention to the specific dimensions and vehicle specifications.
For certain BGM PRO shock absorbers, special tools are also available for adjusting spring preload or loosening locknuts. These are designed to fit the specific shock absorber series.
On modern Vespa models such as the GTS, GT, GTV, Primavera, and Sprint, many maintenance tasks differ from those on classic manual-shift scooters. For example, instead of clutch pullers for manual-shift engines, these models require compatible oil filter wrenches or tools designed for automatic transmissions.
BGM ORIGINAL offers a special oil filter wrench for compatible Piaggio Leader, Quasar, and HPE engines. For certain Piaggio, Minarelli, and other automatic engines, there are also clutch holders or holding tools with various mounting configurations.
The exact engine family is crucial. A holding tool for a Piaggio 50-cc engine is not automatically suitable for a 300-cc Quasar engine or a Minarelli engine.
Not every useful workshop tool is required for a complete engine overhaul. Even small aids can make regular maintenance work significantly easier.
The BGM PRO lineup includes oil measuring bottles with measuring chambers. For example, the 500-ml BGM2005 model features a 25-ml measuring chamber, while the 1-liter BGM2010 model has a 60-ml measuring chamber. This allows
you
to measure out small amounts of oil for mixture lubrication in suitable two-stroke engines.
For the garage, there’s also the BGM PRO maneuvering aid for classic Vespa and Lambretta models. It makes it easier to move a suitable, jacked-up scooter on level ground.
With the BGM PRO rear wheel extension kit, you can add to the maneuvering aid so that the scooter can be turned more easily even in tight spaces.
When selecting a tool, first consider the work you plan to do: Do you need to disassemble a clutch, remove a flywheel, pull in a crankshaft, replace a bearing, or adjust the ignition?
Next, check the exact vehicle and engine specifications as well as the tool’s dimensions. Thread sizes, diameters, mounting types, and the intended components are particularly important.
It’s also worth taking a look at what’s included in the package. Some BGM tools consist of several interlocking parts, while certain holders, screws, or supplementary tools are available separately.
Whether it’s routine maintenance, a demanding engine overhaul, or the restoration of a classic scooter: With the right BGM ORIGINAL and BGM PRO tools, many tasks can be performed with greater precision and in a way that’s gentler on the materials.