PIAGGIO intermediate gear shaft Z = 21/50 for the final drive of Vespa, Piaggio, Aprilia, Derbi, Gilera and Malaguti scooters
The intermediate shaft sits in the reduction gearbox between the gearbox input shaft and the rear wheel axle. It receives torque through the larger gear and transmits it through the smaller pinion to the gear on the rear wheel axle. Z = 21/50 indicates the tooth counts of the two gears.
The shaft carries both the smaller pinion and the larger gear on a common axis. Both ends have cylindrical shaft journals with machined running surfaces.
Scooter Center lists the intermediate shaft under item number GP8410015. The previous Piaggio original part number was 8410015. The current Piaggio replacement part number is 1A020476.
Fits Vespa models
- GT 250 i.e. (2006, Euro 3)
- GTS 250 (2005 to 2016, Euro 3)
- GTS 300 (2012 to 2016 with Euro 3, 2016 to 2017 with Euro 4, 2022 to 2024 with Euro 5, and 2015 to 2016 with no emissions standard specified)
- GTS HPE 300 (2019 with Euro 4, 2020 with Euro 5)
- GTS Super 300 (2010 to 2016 with Euro 3, 2016 to 2020 with Euro 4, 2020 to 2024 with Euro 5, and 2008 to 2018 with no emissions standard specified)
- GTV 250 (2006 to 2009, Euro 3)
- GTV 300 (2010 to 2013 with Euro 3, 2017 Sei Giorni with Euro 4)
- GTV HPE 300 (Euro 4: Sei Giorni from 2019 to 2020 and 2021 for APAC. Euro 5: 2020 Sei Giorni, 2023 RST and 2024 140th Anniversary)
Fits Piaggio models
- MP3 250 (2006 to 2008, Euro 3)
- X7 250 (2008 to 2009, Euro 3)
- X7 300 (2011)
- X8 250 (2006 to 2007)
- XEvo 250 (2007 to 2016, Euro 3)
Other compatible models
- Aprilia Atlantic 250 (2004 to 2008), Atlantic 300 (2010 to 2012) and SR Max 300 (2011 to 2014)
- Derbi GP1 250 (2007 to 2008)
- Gilera Nexus 300 (2008 to 2012, Euro 3)
- Malaguti Madison 300 (2019 to 2021)