Wiring loom -BGM ORIGINAL- Vespa PX EFL (German models), 1984-1997, without battery, with DC horn, horn rectifier, stator plate with 5 wires

A wiring harness is a wearing part. After many years in heat, cold, petrol fumes, vibrations and humidity, even the best copper cable becomes dilapidated. While the outside is usually still well camouflaged by an apparently intact insulation, the so-called inner strand is already corroded and brittle. A weak light, misfiring, all this is past with one of our new high quality wire harnesses.

So that the vehicle can be restored true to the original, we are supplied by the manufacturer who also then already produced the original wire harnesses for Piaggio. You can see, feel and notice that!
Many small affectionate details like the original cable lugs, shrinking tube, hand tinned cable ends etc. let the anticipation for the first ride rise strongly. The certainty that you can rely 100% on the electrical system is also a safe resting place on the first long ride.

Cable harness for the PX Lusso models from 1984 onwards.

The Lusso models have no battery (an exception are the Elestart models) and use alternating current on the frame.

For the control of the horn there is a separate rectifier (black box under the left side cover with green/black striped connection cables).

wiring diagram: See Downloads

(US)

_{AI-translation}