MB-Developments Numéro d`article : MBU0895K
MB-Developments
89,00 €*
disponible immédiatement
Poids d`expédition 0,21 kg
Specially made for MB Scooters - Lambretta rev counter and cylinder head temperature gauge with clock.
Large easy to rear digits with Green LED background.
Comes with wires the correct length to fit a Lambretta with the unit mounted on the stainless steel plate which mounts to the light switch housing.
  • Donne ces fonctions :
  • Rev counter
  • Cylinder head temperature gauge -20C - +300C (-4F-+572F)Clock (12 - 24hr)
  • Maximum revs (depending on setting on number of cylinders and sparks 0 - 5000 to 0 -572F) 25000rpm)
  • Température maximale
  • Avertissements réglables pour les révisions et la température
  • Les révisions sont prélevées sur le fil HT
  • La CHT est constituée d'une bague qui peut être fixée sous la prise d'étincelles ou boulonnée sur la tête/le cylindre

  • Comes in the kit :
  • Rev counter unit
  • Wires for rev counter
  • Wires for CHT
  • Wires for DC supply
  • Battery for setting the unit
  • Instructions

Requires a 12 volt DC supply from a battery - does not work with a single half wave rectifier.
Taille de la jauge 78.5 x 40.5 x 20.5mm.
ASTUCE:Grind the head away around the fins for the temperature sensor to fit easily under the plug or bolt it to you fins or fit it on top of the plug held down with a piece of rubber.
THIS WITHOUT THE BRACKT FOR FITTING TO A LAMBRETTA !AI-translation

Évaluez cet article maintenant et faites-nous savoir ce que vous en pensez..