back

Show all articles from: Drive

Piaggio Item number: 7670144

V-belt -PIAGGIO (811x18.5mm)- Piaggio 50cc HiPer2 long casing

9 Ratings

20,90 €*

available immediately

Shipping weight 0,11 kg

Information on product safety

The original Piaggio V-belt for your scooter in the proven original spare part quality. According to Piaggio internal quality standards always produces the 1st choice on every everyday vehicle.
_{AI-translation}

This is how we ensure, that reviews come from real consumers.

Anonym 11/20/2014

Original Riemen in guter Qualität. Haltbarkeit ist top, nach fast 10.000km routinemäßig ausgetauscht, hätte ihn aber noch weiterfahren können.

Anonym 12/23/2014

Alles bestens

Anonym 06/17/2015

Bester Kompromiss zwischen Qualität und Preis!Top!

Anonym 08/18/2015

passte gut

Anonym 11/21/2015

Was soll ich da schreiben??. Ist original Pia

Anonym 02/07/2016

einwandfrei

Anonym 02/11/2016

Passt

Anonym 07/27/2017

Top Qualität vom Erstausrüster zu einem fairen Preis

Anonym 09/27/2015

For my gilera To all my friends I will recomend the product Quality of product is verry good

Rate this product now

V-belt

Width

18.5 mm

Strength

8.5 mm

OEM numbers (for comparison purposes only)

Piaggio:

436864, 833982, AP8515062

Scooter Center:

7670144

Matching

Accessories

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Piaggio
1286162

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Nut with flange -DIN 6923- M10 x 1.25 (used for crankshaft (drive side)) Piaggio 50cc, clutch bell Piaggio 50-100cc 4-stroke Piaggio 125cc 4-stroke (1st generation) - ET4 125, HABANA125, LIBERTY125, MOJITO125, SFERA125, TORPEDO125

OEM-Qualität
1289519

Nut with flange -DIN 6923- M10 x 1.25 (used for crankshaft (drive side)) Piaggio 50cc, clutch bell Piaggio 50-100cc 4-stroke Piaggio 125cc 4-stroke (1st generation) - ET4 125, HABANA125, LIBERTY125, MOJITO125, SFERA125, TORPEDO125

Pulley unit with clutch -PIAGGIO- Piaggio 50 cc Ø=134mm (since 2000)

Piaggio
1CM1001031

Pulley unit with clutch -PIAGGIO- Piaggio 50 cc Ø=134mm (since 2000)

Brake cleaner -NORMFEST MC1- 500ml

Normfest
3600007

Brake cleaner -NORMFEST MC1- 500ml

Star washer -PIAGGIO- Piaggio 50 cc (since 1998)

Star washer -PIAGGIO- Piaggio 50 cc (since 1998)

Clutch bell -OEM QUALITÄT- Piaggio/Gilera 50-100cc (2-stroke, 4-stroke), Peugeot 50cc, Honda 50cc, Kymco 50cc, SYM 50cc, GY6 (4-stroke) 50cc Ø=107mm

OEM-Qualität
9020124

Clutch bell -OEM QUALITÄT- Piaggio/Gilera 50-100cc (2-stroke, 4-stroke), Peugeot 50cc, Honda 50cc, Kymco 50cc, SYM 50cc, GY6 (4-stroke) 50cc Ø=107mm

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

BGM PRO
BGM0400L

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

Front pulley locking tool -BGM PRO- Piaggio 50-180cc 2-stroke, 50-100cc 4-stroke

BGM PRO
BGM5425

Front pulley locking tool -BGM PRO- Piaggio 50-180cc 2-stroke, 50-100cc 4-stroke

Clutch/flywheel locking tool -OEM QUALITY- Ø=90-125mm- all automatic scooters

OEM-Qualität
BGM8800

Clutch/flywheel locking tool -OEM QUALITY- Ø=90-125mm- all automatic scooters

Front pulley locking tool -PIAGGIO- 50-180cc 2-stroke, 50-100cc 4-stroke

Buzzetti
BU5425

Front pulley locking tool -PIAGGIO- 50-180cc 2-stroke, 50-100cc 4-stroke

Variator-Kit -MALOSSI Multivar 2000- Piaggio 50 cc (since 1998) with 19x15,5mm roller

Malossi
M519019

Variator-Kit -MALOSSI Multivar 2000- Piaggio 50 cc (since 1998) with 19x15,5mm roller

variator / vario kit -NARAKU- sport for Piaggio (98-)

variator / vario kit -NARAKU- sport for Piaggio (98-)

Flywheel front pulley -PIAGGIO- Piaggio 50 cc (since 1998)

Piaggio
PG480410

Flywheel front pulley -PIAGGIO- Piaggio 50 cc (since 1998)

Toothed drive belt oil pump -OEM QUALITY- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

OEM-Qualität
R14000

Toothed drive belt oil pump -OEM QUALITY- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Variator -PIAGGIO- Piaggio 50 cc (1998-)

Variator -PIAGGIO- Piaggio 50 cc (1998-)

Fixed front half-pulley -BGM ORIGINAL- Piaggio 50 cc 2-stroke (1998-)

BGM ORIGINAL
R25927

Fixed front half-pulley -BGM ORIGINAL- Piaggio 50 cc 2-stroke (1998-)

Clutch -RMS- Minarelli 50cc Ø=107mm, Piaggio 50cc, Peugeot 50cc

Clutch -RMS- Minarelli 50cc Ø=107mm, Piaggio 50cc, Peugeot 50cc

Variator-Kit -TOP PERFORMANCES TPR- Piaggio 50 cc (since 1998)

Top Performances

Top Performances
TP9924800

Variator-Kit -TOP PERFORMANCES TPR- Piaggio 50 cc (since 1998)

Matching

Alternative products

V-belt -DAYCO (811x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -DAYCO (811x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -DR (811x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -DR (811x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -MALOSSI Special (810x18.7mm)- Piaggio 50cc HiPer2 long casing

Malossi
M6116889

V-belt -MALOSSI Special (810x18.7mm)- Piaggio 50cc HiPer2 long casing

drive belt -NARAKU-for Aprilia, Gilera Piaggio long

drive belt -NARAKU-for Aprilia, Gilera Piaggio long

V-belt -POLINI Aramid (820x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -POLINI Aramid (820x18.5mm)- Piaggio 50cc HiPer2 long casing

Matching

Customers also bought

Circlip -SHAFT DIN471- Ø=15mm (used for kickstart shaft Minarelli, CPI)

OEM-Qualität
1006416

Circlip -SHAFT DIN471- Ø=15mm (used for kickstart shaft Minarelli, CPI)

Indicator flasher relay -PIAGGIO 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE

Piaggio
1195703

Indicator flasher relay -PIAGGIO 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX EFL (1984-), Cosa, Cosa FL, T5 125cc, APE

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Piaggio
1286162

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Temperature sensor in cylinder head -PIAGGIO- Piaggio 50-180cc LC 2-stroke, Leader 125-200cc LC, Quasar 250-300cc - one plug

Piaggio
1293410

Temperature sensor in cylinder head -PIAGGIO- Piaggio 50-180cc LC 2-stroke, Leader 125-200cc LC, Quasar 250-300cc - one plug

Air intake hose to frame -PIAGGIO- Runner 125-180 FX-FXR, SKR, Skipper 125-150 (2-stroke), Typhoon 125, Typhoon X 125, Typhoon XR 125

Piaggio
1431863

Air intake hose to frame -PIAGGIO- Runner 125-180 FX-FXR, SKR, Skipper 125-150 (2-stroke), Typhoon 125, Typhoon X 125, Typhoon XR 125

Spacer ring for kickstarter shaft Ø=16.3x23.8mm -PIAGGIO- Piaggio 50-180cc 2-stroke, Piaggio 50-100cc 4-stroke, Piaggio 125-150cc Leader

Piaggio
1433987

Spacer ring for kickstarter shaft Ø=16.3x23.8mm -PIAGGIO- Piaggio 50-180cc 2-stroke, Piaggio 50-100cc 4-stroke, Piaggio 125-150cc Leader

V-belt -PIAGGIO (832x22mm)- Piaggio 180cc 2-stroke

Piaggio
1484497

V-belt -PIAGGIO (832x22mm)- Piaggio 180cc 2-stroke

CDI -PIAGGIO- Piaggio 50cc models with carburettor (2000-) (Hi-Per 2)

Piaggio
158095R

CDI -PIAGGIO- Piaggio 50cc models with carburettor (2000-) (Hi-Per 2)

Front rack, fold down -PIAGGIO- Vespa GT, GTL, GTV, GTS 125-300 (-2018) - chrome

Piaggio
1672321

Front rack, fold down -PIAGGIO- Vespa GT, GTL, GTV, GTS 125-300 (-2018) - chrome

Feeler gauge -UNIVERSAL- 20 blades, metal - 0.05-1.00mm + 0.002-0.040 inch

BGM ORIGINAL
1800013

Feeler gauge -UNIVERSAL- 20 blades, metal - 0.05-1.00mm + 0.002-0.040 inch

Ball bearing -638 2RZ- (08x28x09mm) - (used for gearbox input shaft/variator cover Piaggio 50cc 2-stroke (1998-), Piaggio 50-100cc 4-stroke)

Ball bearing -638 2RZ- (08x28x09mm) - (used for gearbox input shaft/variator cover Piaggio 50cc 2-stroke (1998-), Piaggio 50-100cc 4-stroke)

Nut with flange -DIN 6923- M14 x 1.5 (used for clutch bell Piaggio Master 400-500cc)

OEM-Qualität
1827116

Nut with flange -DIN 6923- M14 x 1.5 (used for clutch bell Piaggio Master 400-500cc)

V-belt -PIAGGIO (811x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -PIAGGIO (811x18.5mm)- Piaggio 50cc HiPer2 long casing

V-belt -PIAGGIO (811x18.5mm)- Piaggio 50cc HiPer2 long casing