Brake lever and clutch lever CIF HQ Black Edition with ball end for Vespa Smallframe
Black aluminum lever set with ball end for classic Vespa Smallframe models from approx. 1976 onwards
. The CIF HQ Black Edition lever set consists of a brake lever and clutch lever in black aluminum design. The levers have the later, more ergonomic shape with ball end and therefore fit very well visually and technically with Vespa Smallframe models from around 1976, in particular the V50 Special, PV125 and ET3. The curved shape offers a more comfortable reach than early straight levers and is therefore also interesting for riders with smaller hands.
CIF HQ
Black Edition
Brake lever and clutch lever
aluminum
with ball end
Smallframe from approx. 1976
What makes this lever set so special
Set of two levers: brake lever and clutch lever in matching look
Ball ends: later safety design with rounded lever ends
Comfortable grip width: curved shape, easy to control and also suitable for smaller hands
Black Edition: black version to match dark add-on parts and custom bodies
Classic smallframe fittings: suitable for round smallframe steering heads with corresponding lever mount
More ergonomic than early straight levers
Early smallframe levers are often straight and have tapered ends. The later version with a ball end is more comfortable to hold and allows finer control of the brake and clutch. The modified lever shape is particularly noticeable on longer journeys, in city traffic or with smaller hands.
Pro tip: also interesting for Rally and Sprint
The lever set can also be interesting for Vespa Rally and Vespa Sprint if the reach of the original levers is too large for smaller hands. The prerequisite is a suitable lever mount on the existing fitting. The old parts should therefore be compared with the new levers before fitting.
Area of application and delimitation
The levers are intended for classic Vespa Smallframe models with round steering heads and a suitable lever mount. These include in particular late V50 Special, Primavera 125 and ET3 from approx. 1976 onwards. Retrofitting may be possible on earlier smallframes if the installed fitting already uses the appropriate mount.
Important fitting note
not for PK: not for use on PK S, PK XL, PK XL2, ETS or HP
Check fitting: compare existing lever mount on early smallframes and converted vehicles
Adjust after fitting: Check brake cable and clutch cable for correct play
Check ease of movement: Levers must return cleanly and must not jam
Fitting
The levers replace the existing brake and clutch levers on the original fittings. After fitting, both cables should be checked and readjusted if necessary. The levers must move freely, return cleanly and must not be in contact with the fittings or the handlebar head.
Video
Suitable vehicle models - grouped together
| Vespa 50 Special | V5B3T, late version, 2T AC, '75-'83 |
|---|
| Vespa 125 Primavera | VMA2T, late version from approx. 1976 check |
|---|
| Vespa 125 Primavera ET3 | VMB1T, 2T AC, '76-'90 |
|---|
| Vespa 50 / N / L / R / S | Can be tested with suitable fitting and lever mount |
|---|
| Vespa 90 | Can be tested with suitable fitting and lever mount |
|---|
| Vespa 90 SS / Super Sprint | can be tested with suitable fitting and lever mount |
|---|
| Vespa 100 Sport | can be tested with suitable fitting and lever mount |
|---|
| Vespa 125 Nuova | VMA1T, can be tested with suitable fitting and lever mount |
|---|
Note: Different levers and fittings were used on early smallframes depending on the year of manufacture and market version. Before ordering, please compare the existing lever, mount and attachment.
| Motovespa 75 Primavera | 9PN / 9PK, check with suitable fitting and lever mount |
|---|
| Motovespa 125 Primavera | 9T / 9NV / 9NK, check for suitable fitting and lever mount |
|---|
Note: Motovespa models may have different lever geometries depending on the Spanish version, year of manufacture and handlebar head. The assignment only applies to suitable smallframe fittings with corresponding lever mount.
| Vespa Rally 180 / 200 | only with matching lever mount, compare grip width beforehand |
|---|
| Vespa Sprint / Sprint Veloce | only with suitable lever mount, compare grip width beforehand |
|---|
This use is intended as an ergonomic tip if the original levers reach too far for small hands. Before fitting, be sure to compare the existing fitting with the lever set.
Brief technical overview
| manufacturer | CIF HQ |
|---|
| Type | Brake lever and clutch lever as a set |
|---|
| Version | Black Edition, with ball end |
|---|
| material | aluminum |
|---|
| color | black color |
|---|
| Suitable for | Vespa Smallframe from approx. 1976 with matching fitting |
|---|
| Not suitable | Vespa PK, PK S, PK XL, PK XL2, ETS, HP |
|---|
Conclusion
The CIF HQ Black Edition lever set is a harmonious replacement and upgrade set for Vespa Smallframe models with matching fittings. The black aluminum levers with ball ends combine a classic look with a more comfortable reach and fit particularly well with late V50 Special, Primavera 125 and ET3 as well as dark Custom and Black Edition bodies.
FAQ about the CIF HQ Black Edition lever set
Yes, the set is usually the right design for a late V50 Special with matching original fittings.
No. Other levers are used for PK, PK S, PK XL, PK XL2, ETS and HP.
This is possible if the installed fitting uses the same lever mount. For early vehicles, please compare existing levers and mountings.
Ball ends reduce sharp edges at the end of the lever and correspond to the later safety design. In addition, the curved lever shape is often more comfortable to hold.
DE | €
