back

Show all articles from: Cable pulls & sets

BGM ORIGINAL Item number: BGM6400UI

Inner cable set, universal -BGM ORIGINAL Vespa, Lambretta- 2x Ø=1,9mm x 2100mm (pear shape nipple, used as clutch/front brake cable), 2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as gear change cable), 1x Ø=1,2mm x 2500mm (nipple Ø=5,5mm x 7mm, used as

18 Ratings

13,90 €*

available immediately

Shipping weight 0,17 kg

Information on product safety

High quality inner cable set as ideal repair kit for on the road or as a replacement for the workshop.

The set contains:

2x Ø=1,9mm x 2100mm (nipple bulb type, used as clutch cable / brake cable front),
2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as shift cable)
1x Ø=1,2mm x 2500mm (nipple Ø=5.5mm x 7mm, used as throttle cable)
1x Ø=1.2mm x 2500mm (nipple Ø=3.0mm x 3mm, used as throttle cable)

_{AI-translation}

This is how we ensure, that reviews come from real consumers.

Anonym 07/31/2017

Leicht zu verbauen, ist aber leider ziemlich schnell wieder gerissen.

Anonym 07/12/2019

Not as advertised, but not bad
Cables seem OK, but are not the same thickness as advertised. The clutch and front brake cables are meant to be 1.9mm, but they are 1.6mm. The gear cables should be 1.6mm but are 1.3mm. I haven't measured the lengths yet, but I guess they'll do the job.

Anonym 02/18/2018

passen super....

Olivier V. from Poperinge 10/05/2025

Erol B. from Dilsen-Stokkem 09/24/2025

Marcel S. from Essen 09/01/2025

Reiner H. from Augsburg 07/03/2025

Sascha L. from Wülfrath 05/25/2025

André D. from Krefeld 05/21/2025

Matthias M. from Velbert 05/21/2025

Anonym 08/28/2017

Great cable kit for on the road, good quality with various nipples included. A must for any rally goer

Anonym 01/11/2018

Gute Qualität und Passform !

Rate this product now

Tips & useful information

Matching blog articles for this product

Rebuilding a Vespa VBB 150

Rebuilding a Vespa VBB 150

From screwing to starting: Getting the Vespa VBB 150 fit again! ...

Lambretta gearshift adjustment, cable routing and nipples

Lambretta gearshift adjustment, cable routing and nipples

We take a close look at the controls and what you can do from the headset to the cables to the gearb ...

All news in the Scooter Center Discover the blog

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Titanium grease -HANSELINE- bicycle grease, Bowden cable grease, 20ml syringe

Hanseline
3332036

Titanium grease -HANSELINE- bicycle grease, Bowden cable grease, 20ml syringe

Cable pliers for gear, clutch and brake cables -ICETOOLZ-

Icetoolz
7673530

Cable pliers for gear, clutch and brake cables -ICETOOLZ-

Adjuster screw and trunnion set -BGM ORIGINAL- Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GL150 (VLA1T), VNA, VBA, VBA, VBB, V50, V90, PV 125

BGM ORIGINAL
BGM6464N

Adjuster screw and trunnion set -BGM ORIGINAL- Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GL150 (VLA1T), VNA, VBA, VBA, VBB, V50, V90, PV 125

Trunnion set -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

BGM ORIGINAL
BGM6466

Trunnion set -BGM ORIGINAL- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)

BGM ORIGINAL
BGM8081

Rear brake cable, inner -BGM ORIGINAL Ø=2.9mm x 1050mm with threaded end M6- Lambretta (Serie 1-3) LI, LIS, SX, TV, GP, DL (also suitable for Vespa Largeframe (1958-1977) with T5 brake lever)

Matching

Customers also bought

Cylinder -POLINI cast iron 75 ccm Sport- Vespa V50, PK50

Cylinder -POLINI cast iron 75 ccm Sport- Vespa V50, PK50

Cylinder -POLINI cast iron 85 cc Sport- Vespa V50, PK50

Cylinder -POLINI cast iron 85 cc Sport- Vespa V50, PK50

Cluch spring -POLINI 30N/mm- Vespa V50 (V5A1T, V5A2T, V5A3T, V5B1T, V5B2T, V5B3T, V5B4T, V5R1T, V5SA1T), SS50 (V5SS1T), SR50 (V5SS2T), V90 (V9A1T), SS90 (V9SS1T), V90 Racer (V9SS2T), 125 Nuovo (VMA1T), PV125 (VMA2T), ET3 125 (VMB1T), PK 50 (V5X1T), PK 50

Cluch spring -POLINI 30N/mm- Vespa V50 (V5A1T, V5A2T, V5A3T, V5B1T, V5B2T, V5B3T, V5B4T, V5R1T, V5SA1T), SS50 (V5SS1T), SR50 (V5SS2T), V90 (V9A1T), SS90 (V9SS1T), V90 Racer (V9SS2T), 125 Nuovo (VMA1T), PV125 (VMA2T), ET3 125 (VMB1T), PK 50 (V5X1T), PK 50

Screw 2.9 x 9.5mm center floor mat retainer stripe, mudguard crest -PIAGGIO- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), Super, VNA, VNB, VBA, VBB, V50,

Piaggio
1015727

Screw 2.9 x 9.5mm center floor mat retainer stripe, mudguard crest -PIAGGIO- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), Super, VNA, VNB, VBA, VBB, V50,

Circlip for gudgeon pin -15mm x 1.25mm- G type - used e.g. with cylinder Polini 177, Polini 133, DR133, DR177

Circlip for gudgeon pin -15mm x 1.25mm- G type - used e.g. with cylinder Polini 177, Polini 133, DR133, DR177

Grommet rear sidepanel hook -PIAGGIO- Vespa Largeframe (1958-)

Piaggio
1024041

Grommet rear sidepanel hook -PIAGGIO- Vespa Largeframe (1958-)

Grommet frame/ brake, clutch cable -PIAGGIO- Vespa PX, T5 125cc, Rally, Sprint, Sprint Veloce, TS, GT, GTR, GL, Super, SS180, GS160, VNA, VNB, VBA, VBB

Piaggio
1046767

Grommet frame/ brake, clutch cable -PIAGGIO- Vespa PX, T5 125cc, Rally, Sprint, Sprint Veloce, TS, GT, GTR, GL, Super, SS180, GS160, VNA, VNB, VBA, VBB

Kickstart spring -PIAGGIO- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GS160 / GS4 (VSB1T), SS180 (VSC1T), GL150 (VLA1T), VNA, VNB, VBA, VBB

Piaggio
1047218

Kickstart spring -PIAGGIO- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GS160 / GS4 (VSB1T), SS180 (VSC1T), GL150 (VLA1T), VNA, VNB, VBA, VBB

Horn cover -OEM QUALITY- PX EFL (1984-1997) - unpainted

OEM-Qualität
1050003

Horn cover -OEM QUALITY- PX EFL (1984-1997) - unpainted

Badge horn cover -VESPA- Piaggio hexagon - Vespa PX EFL (1984-2000), Vespa T5 125cc, Vespa PK

Piaggio
1050007

Badge horn cover -VESPA- Piaggio hexagon - Vespa PX EFL (1984-2000), Vespa T5 125cc, Vespa PK

Badge handlebar -OEM QUALITY- Vespa Piaggio hexagon - Vespa Rally180 (VSD1T) (since 1968), Vespa Sprint150 (VLB1T) Veloce (since 1969), Vespa GTR125 (VNL2T) 125 (since 1969), Vespa TS 125 (since 1975)

OEM-Qualität
1050014

Badge handlebar -OEM QUALITY- Vespa Piaggio hexagon - Vespa Rally180 (VSD1T) (since 1968), Vespa Sprint150 (VLB1T) Veloce (since 1969), Vespa GTR125 (VNL2T) 125 (since 1969), Vespa TS 125 (since 1975)

Flywheel cover -OEM QUALITY- Vespa PX80, PX125, PX150, PX200 - models with kickstart only - chrome

OEM-Qualität
1050026

Flywheel cover -OEM QUALITY- Vespa PX80, PX125, PX150, PX200 - models with kickstart only - chrome

Inner cable set, universal -BGM ORIGINAL Vespa, Lambretta- 2x Ø=1,9mm x 2100mm (pear shape nipple, used as clutch/front brake cable), 2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as gear change cable), 1x Ø=1,2mm x 2500mm (nipple Ø=5,5mm x 7mm, used as

Inner cable set, universal -BGM ORIGINAL Vespa, Lambretta- 2x Ø=1,9mm x 2100mm (pear shape nipple, used as clutch/front brake cable), 2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as gear change cable), 1x Ø=1,2mm x 2500mm (nipple Ø=5,5mm x 7mm, used as

Inner cable set, universal -BGM ORIGINAL Vespa, Lambretta- 2x Ø=1,9mm x 2100mm (pear shape nipple, used as clutch/front brake cable), 2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as gear change cable), 1x Ø=1,2mm x 2500mm (nipple Ø=5,5mm x 7mm, used as

Inner cable set, universal -BGM ORIGINAL Vespa, Lambretta- 2x Ø=1,9mm x 2100mm (pear shape nipple, used as clutch/front brake cable), 2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as gear change cable), 1x Ø=1,2mm x 2500mm (nipple Ø=5,5mm x 7mm, used as

Inner cable set, universal -BGM ORIGINAL Vespa, Lambretta- 2x Ø=1,9mm x 2100mm (pear shape nipple, used as clutch/front brake cable), 2x Ø=1,6mm x 2100mm (nipple Ø=5,5mm x 7mm, used as gear change cable), 1x Ø=1,2mm x 2500mm (nipple Ø=5,5mm x 7mm, used as