Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Bush kickstart -ROLLERLADEN steel- Vespa Wideframe V1-V15, V30-V33, VU, VN, VM, VB, VL, GS150 / GS3

7673410S
Bush kickstart -ROLLERLADEN steel- Vespa Wideframe V1-V15, V30-V33, VU, VN, VM, VB, VL, GS150 / GS3
Bush kickstart -ROLLERLADEN steel- Vespa Wideframe V1-V15, V30-V33, VU, VN, VM, VB, VL, GS150 / GS3
Bush kickstart -ROLLERLADEN steel- Vespa Wideframe V1-V15, V30-V33, VU, VN, VM, VB, VL, GS150 / GS3

Description


The old Vespa engines with separate swing arm have a very complex kick start mechanism. If this is obviously intact, it should not be disassembled. Often this only happens because the engine is not tight at this point and gear oil leaks out.
This defect can be repaired quickly, easily and inexpensively by simply replacing the felt ring and the cover plate of the same.
If, on the other hand, the entire mechanism has radial play, a complete overhaul is advisable. For this purpose, we offer a kickstarter bushing that is not directly ready for installation.
It is a bushing with undersize. The inner diameter of the bushing is therefore smaller and the bushing and the kickstarter segment must be adapted to each other. The bushing should have a 0.1 mm larger diameter when placed loosely on the kicker segment. Since the kicker segment is sometimes worn in, it is advisable to turn it off and then adjust the bushing.

Material: Steel

AI-translation

 
€19.94 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Piaggio 22387
Customers alternatively searched for
Buchse | Kickstarter | Hülse | Adapter | Rohr | Bush | Kickstart | Tube | Washer | Sleeve | Palier | Bussola | Casquillo |
Recently viewed items