Postage free from 99€ (DE)
High customer satisfaction
DE | €
- Vespa Classic
- Cable Set - BGM PRO, Silk Liner - Vespa PK XL2 - with Shift Cable
Compatible with Vespa PK XL2, PK HP, FL, and FL2 models featuring a small choke lever on the right side of the handlebar, next to the front brake lever.
The BGM PRO Silk Liner Cable Set is designed for Vespa PK XL2 models and technically related PK HP, FL, and FL2 vehicles. This version includes the shift cable and is therefore suitable for a complete overhaul of the control cables on vehicles with PK XL2 cable routing.
BGM PRO Silk Liner PE Inner Liner Stainless Steel Inner Cables with shift cable
This cable set is designed for Vespa PK XL2, PK HP, FL, and FL2 models with PK-XL2 cable routing. The easiest way to identify compatibility is directly on the handlebars: If the vehicle has a small choke lever on the right side of the handlebars, next to the front brake lever, this cable set is the correct version.
This variant is intended for a comprehensive overhaul of the control cables. In addition to the throttle, clutch, brake, and choke, the gearshift cable is also replaced. This is particularly useful if the handlebars are being disassembled anyway or if old cables that are stiff, kinked, or corroded need to be replaced.
The following models belong to the PK-XL2 family or have a similarly configured cable routing. In practice, a quick look at the choke lever is sufficient for selection: if the small choke lever is located on the right side of the handlebar next to the front brake lever, this is the correct cable set.
| Model | Type | Identification |
|---|---|---|
| Vespa PK 50 XL2 | V5X3T | Small choke lever on the right side of the handlebar |
| Vespa PK 50 XL2 Electric Starter | V5X3T | Small choke lever on the right side of the handlebar |
| Vespa PK 50 XL2 | V5N1T | Small choke lever on the right side of the handlebar |
| Vespa PK 50 XL2 FL2 | V5P2T | Small choke lever on the right side of the handlebar |
| Vespa PK 50 HP | V5N2T | Small choke lever on the right side of the handlebar |
| Vespa PK 50 XL2 HP | V5N2T | Small choke lever on the right side of the handlebar |
| Vespa FL 50 | V5N1T | Small choke lever on the right side of the handlebar |
| Vespa FL2 50 HP | V5N2T | Small choke lever on the right side of the handlebar |
| Vespa FL2 50 XL | V5X5T | Small choke lever on the right side of the handlebar |
| Vespa PK 50 N | V5X5T | Small choke lever on the right side of the handlebar |
Vehicles without this small choke lever on the handlebar typically use the cable set for Vespa PK XL or PK S models.
The High Performance PE inner liner reduces friction between the inner cable and the outer sheath. This makes the throttle, clutch, brake, and gearshift easier to operate and more responsive. Especially in the tight handlebar area of the PK XL2, a clean, low-friction cable routing is beneficial because the cables operate within tight bends there.
The outer casings are designed specifically for each vehicle and feature high flexural rigidity. This allows them to be routed through the frame in a controlled manner without kinking immediately upon installation. For a clean result, old cables should be completely removed, the original cable routes should be followed, and sharp kinks should be avoided.
The small choke lever on the right side of the handlebar is the key identifying feature of this PK XL2 cable set. If this choke lever is missing, the corresponding cable set for Vespa PK XL or PK S models is the correct alternative.
The BGM PRO Silk Liner cable set with shift cable is the ideal solution for a comprehensive overhaul of the control cables on Vespa PK XL2, HP, FL, and FL2 models with a small choke lever on the right side of the handlebar. The combination of a PE inner liner, stainless steel inner cables, tin-plated ends, and vehicle-specific lengths ensures smooth operation and precisely guided cable routing.
