back

Show all articles from: Crankshaft

Tameni Item number: 3333296

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

139,00 €*

not available

Shipping weight 1,4 kg

Send me an e-mail as soon as the item is back in stock.

Information on product safety

Crankshaft -TAMENI Standard- Vespa Wideframe V1-V15

Crankshaft re-produced in Italy by Tameni - type mushroom shaft - for the Wideframe 125cc (1947-1950) V1-V15 models. The shaft has a stroke of 50mm with a 105mm connecting rod and piston pin Ø15mm.

(TW12122)

_{AI-translation}

Rate this article now and let us know what you think.

Rate this product now

OEM numbers (for comparison purposes only)

Piaggio:

016735, 16735

Scooter Center:

3333296

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Woodruff key -PIAGGIO 3x5mm- for crankshaft/flywheel side Vespa Ciao, Bravo, SI, Piaggio 50-180cc 2-stroke, Piaggio 50-200cc (4-stroke), PX, PK, Cosa, Lambretta A, B, C, LC, D 125 (1951-1955), Minarelli 2-stroke 50cc

Piaggio
9000093

Woodruff key -PIAGGIO 3x5mm- for crankshaft/flywheel side Vespa Ciao, Bravo, SI, Piaggio 50-180cc 2-stroke, Piaggio 50-200cc (4-stroke), PX, PK, Cosa, Lambretta A, B, C, LC, D 125 (1951-1955), Minarelli 2-stroke 50cc

Flywheel nut M11 x 1.50 (high strength) collar Ø=24mm h=3mm WS=14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3

BGM PRO
BGM2254

Flywheel nut M11 x 1.50 (high strength) collar Ø=24mm h=3mm WS=14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3

Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm

Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Woodruff key -PIAGGIO 3x5mm- for crankshaft/flywheel side Vespa Ciao, Bravo, SI, Piaggio 50-180cc 2-stroke, Piaggio 50-200cc (4-stroke), PX, PK, Cosa, Lambretta A, B, C, LC, D 125 (1951-1955), Minarelli 2-stroke 50cc

Piaggio

Piaggio
9000093

Woodruff key -PIAGGIO 3x5mm- for crankshaft/flywheel side Vespa Ciao, Bravo, SI, Piaggio 50-180cc 2-stroke, Piaggio 50-200cc (4-stroke), PX, PK, Cosa, Lambretta A, B, C, LC, D 125 (1951-1955), Minarelli 2-stroke 50cc

Flywheel nut M11 x 1.50 (high strength) collar Ø=24mm h=3mm WS=14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3

BGM PRO

BGM PRO
BGM2254

Flywheel nut M11 x 1.50 (high strength) collar Ø=24mm h=3mm WS=14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3

Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm

Vape

Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm

Matching

Customers also bought

Oil seal 27x42x10mm -FPM, dual lip- Vespa V1-15, V30-33, VN, VM, VL, VD, VB, VGL, PX (since 1992), T5 125cc, Cosa - used for rear hub / axle (wideframe = outer / largeframe = inner)

OEM-Qualität
3820008FPM

Oil seal 27x42x10mm -FPM, dual lip- Vespa V1-15, V30-33, VN, VM, VL, VD, VB, VGL, PX (since 1992), T5 125cc, Cosa - used for rear hub / axle (wideframe = outer / largeframe = inner)

Circlip -HOLE DIN472- Ø=42mm - used for bearing layshaft / christmas tree PX125, PX200, Cosa125, Cosa200, Rally200

OEM-Qualität
4940004

Circlip -HOLE DIN472- Ø=42mm - used for bearing layshaft / christmas tree PX125, PX200, Cosa125, Cosa200, Rally200

Tyre -MICHELIN S83- 3.50 - 8 inch TT 46J

Michelin
6000017

Tyre -MICHELIN S83- 3.50 - 8 inch TT 46J

Needle set for clutch bearing -OEM QUALITY- Vespa Wideframe V1-15, V30-V33, VM, VN, VL, VB- 2.5x15.8mm 40 pcs

OEM-Qualität
7672396

Needle set for clutch bearing -OEM QUALITY- Vespa Wideframe V1-15, V30-V33, VM, VN, VL, VB- 2.5x15.8mm 40 pcs

Piston -VESPA piston with deflector- Vespa 125 V1-V15,V30-V33 (1948-1953), Hoffmann Vespa 125 A/B, ACMA 125 (1951-1953), Motovespa 125N (1953-1955, engine V33M) - 56.50mm

Piston -VESPA piston with deflector- Vespa 125 V1-V15,V30-V33 (1948-1953), Hoffmann Vespa 125 A/B, ACMA 125 (1951-1953), Motovespa 125N (1953-1955, engine V33M) - 56.50mm

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1947-1950), bell-shaped, conrod=110mm, stroke=50mm (Vespa V1-V15)