back

Show all articles from: Crankshaft

Tameni Item number: GB186

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)

199,00 €*

not available

Shipping weight 1,56 kg

Send me an e-mail as soon as the item is back in stock.

Information on product safety

High-quality reproduction of the crankshaft type for the old Vespas with nose piston and direct intake at the cylinder.
This was used in the vehicles which still had only a two-digit chassis prefix (VN, VM, VL, VB)

intake type: slot-controlled cylinder intake
crankshaft type: Full cheek
stroke: 54.0mm
conrod: 110.0mm
piston pin Ø: 15mm
conrod pin bottom Ø: 20mm

_{AI-translation}

Rate this article now and let us know what you think.

Rate this product now

Ball bearing

Dimensions

15mm

Piston pin

Diameter

15 mm

Crankshafts

Stroke

54 mm

Thread on alternator side

M11x1,5 Rechtsgewinde

Thread on drive side

M12x1,5 Rechtsgewinde

Crank web diameter

93 mm

Crankcase must be spindled

nein

Motor housing must be modified

nein

Rotary vane crankshaft

nein

Full cheek crankshaft

nein

Wide crank webs

34 mm

Bearing seat diameter on alternator side

25 mm

Bearing seat width on alternator side

12 mm

Bearing seat diameter on drive side

25 mm

Bearing seat width on drive side

12 mm

Diameter of sealing ring seat on alternator side

20 mm

Wide sealing ring seat on alternator side

8 mm

Diameter of sealing ring seat on drive side

20 mm

Wide sealing ring seat on drive side

8 mm

Length of crankshaft stub on alternator side

34 mm

Length of crankshaft stub on drive side

22 mm

Width over all

165 mm

Connecting rod

Connecting rod length

110 mm

Connecting rod strength

5.4 mm

Connecting rod eye top diameter

15 mm

Lifting pin diameter

18 mm

Upper connecting rod eye lubrication hole

ja

Lower connecting rod eye lubrication hole

Schlitz

Connecting rod thrust washers

nein

OEM numbers (for comparison purposes only)

Piaggio:

025916, 25916, 59268

Scooter Center:

GB186

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Clutch nut -IMPORT- M12 x 1.50 collar Ø=18.6mm h=10mm WS=14- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

Clutch nut -IMPORT- M12 x 1.50 collar Ø=18.6mm h=10mm WS=14- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

Delivery date

Flywheel nut M11 x 1.50 collar Ø=24mm h=3mm WS=14 -OEM QUALITY- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3, GL

OEM-Qualität
7672404

Flywheel nut M11 x 1.50 collar Ø=24mm h=3mm WS=14 -OEM QUALITY- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3, GL

Woodruff key -PIAGGIO DIN6888- 4 x 6.5 (used for crankshaft/clutch side Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, crankshaft/flywheel side Lambretta LI, LIS, SX, TV, DL, GP, Piaggio 250-300cc 4-stroke)

Piaggio
7675020

Woodruff key -PIAGGIO DIN6888- 4 x 6.5 (used for crankshaft/clutch side Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, crankshaft/flywheel side Lambretta LI, LIS, SX, TV, DL, GP, Piaggio 250-300cc 4-stroke)

Woodruff key -PIAGGIO 3x5mm- for crankshaft/flywheel side Vespa Ciao, Bravo, SI, Piaggio 50-180cc 2-stroke, Piaggio 50-200cc (4-stroke), PX, PK, Cosa, Lambretta A, B, C, LC, D 125 (1951-1955), Minarelli 2-stroke 50cc

Piaggio
9000093

Woodruff key -PIAGGIO 3x5mm- for crankshaft/flywheel side Vespa Ciao, Bravo, SI, Piaggio 50-180cc 2-stroke, Piaggio 50-200cc (4-stroke), PX, PK, Cosa, Lambretta A, B, C, LC, D 125 (1951-1955), Minarelli 2-stroke 50cc

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

BGM PRO
BGM0400L

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant), FAG bearing (9 balls)- Vespa Wideframe VM, VN, VL, VB, GS150 / GS3 (VS1T - VS5T, VDTS), VD1, VD2, Largeframe VNA1, VNA2 (VNA2M, -091392), VBA (VBA1M, -313583)

BGM PRO
BGM1112

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant), FAG bearing (9 balls)- Vespa Wideframe VM, VN, VL, VB, GS150 / GS3 (VS1T - VS5T, VDTS), VD1, VD2, Largeframe VNA1, VNA2 (VNA2M, -091392), VBA (VBA1M, -313583)

Flywheel nut M11 x 1.50 (high strength) collar Ø=24mm h=3mm WS=14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3

BGM PRO
BGM2254

Flywheel nut M11 x 1.50 (high strength) collar Ø=24mm h=3mm WS=14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3

Delivery date

Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm

Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm

Delivery date

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Matching

Customers also bought

Fuel tap -IMPORT- Vespa Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), Super, VNB, VNA , VBA, VBB

Fuel tap -IMPORT- Vespa Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), Super, VNB, VNA , VBA, VBB

Footboard stripes set -OEM QUALITY- Vespa 150 (VBA1T (-1959), VBB1T 104210-), Vespa 125 (VNL1T Swiss models only) - Bar width = 18mm

OEM-Qualität
5821084

Footboard stripes set -OEM QUALITY- Vespa 150 (VBA1T (-1959), VBB1T 104210-), Vespa 125 (VNL1T Swiss models only) - Bar width = 18mm

Footboard stripes set -CIF- Vespa VNB3T, VNB4T, VNB5T, VNB6T, VBB2T - Bar width 13.5mm

Footboard stripes set -CIF- Vespa VNB3T, VNB4T, VNB5T, VNB6T, VBB2T - Bar width 13.5mm

Flywheel cover -LAMBRETTA- Lambretta LD 125 (1956-), LD 150, D 150

Casa Lambretta
7671441

Flywheel cover -LAMBRETTA- Lambretta LD 125 (1956-), LD 150, D 150

Centre stand -LAMBRETTA- Lambretta LD

Casa Lambretta
7674167

Centre stand -LAMBRETTA- Lambretta LD

Fuel tap -LAMBRETTA- Lambretta LD 125 1956-), LD 150

Casa Lambretta
7674186

Fuel tap -LAMBRETTA- Lambretta LD 125 1956-), LD 150

Delivery date

Spring for side panel inspection door -LAMBRETTA- LC, LD 125 (-1955)

Casa Lambretta
7674204

Spring for side panel inspection door -LAMBRETTA- LC, LD 125 (-1955)

Warning light -LAMBRETTA- Lambretta D 150, LD 125 (1956-), LD 150

Casa Lambretta
7674234

Warning light -LAMBRETTA- Lambretta D 150, LD 125 (1956-), LD 150

Rubber sleeve throttle cable -LAMBRETTA- Lambretta LD 125 (1956-), LD 150

Casa Lambretta
7674235

Rubber sleeve throttle cable -LAMBRETTA- Lambretta LD 125 (1956-), LD 150

Delivery date

Rear floor mat -LAMBRETTA- LC, LD - grey

Casa Lambretta
8001155

Rear floor mat -LAMBRETTA- LC, LD - grey

Side panel grille -CASA LAMBRETTA- Lambretta LD (1953 till mid of 1956)

Casa Lambretta
8001160

Side panel grille -CASA LAMBRETTA- Lambretta LD (1953 till mid of 1956)

Side panel grille -CASA LAMBRETTA- Lambretta LD (since mid of 1956)

Casa Lambretta
8001177

Side panel grille -CASA LAMBRETTA- Lambretta LD (since mid of 1956)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)

Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)