Top Racing Item number: BGM034023
Top Racing
2 Ratings
149,00 €*
available immediately
Shipping weight 1,4 kg

TOP RACING Evolution crankshaft for Piaggio 50cc 2-stroke

The TOP RACING EVOLUTION crankshafts are racing shafts of the very highest quality.

The completely forged shafts are finely balanced full metal shafts. Both the crank webs and the connecting rod are forged. This gives the shaft incredible durability.

In order to achieve the highest possible weight, which is extremely important for low-vibration engine running, the shafts were not fitted with plastic paddings. Instead, the crank webs were designed directly as solid shafts. It may not look as colorful, but it only has advantages.

The full cheek shaft increases the pre-compression, which results in a better filling level of the cylinder over the entire speed range.

The bearings are in no way inferior to this top quality. The SSC racing bearings can withstand even the most extreme speed orgies. The double-slotted connecting rod with silver cage and double lubrication holes in the upper connecting rod bearing can withstand even the most brutal continuous loads.

The holes are balanced with copper and aluminum weights to achieve optimum balancing.

Its very high weight and the choice of balancing weights give it first-class smooth running.
This is how we ensure, that reviews come from real consumers.
Anonym  05/13/2015

sehr stabile und laufruhige kurbelwelle mit 70ccm (polini) lauft problemlos zum empfehlen !!!

Anonym  04/26/2016

super Quali!!

Ball bearing
Dimensions
12x17x13mm
 
Piston pin
Diameter
12 mm
 
Crankshafts
Stroke
39.3 mm
Thread on alternator side
M10x1,25 Rechtsgewinde
Thread on drive side
M10x1,25 Rechtsgewinde
Crank web diameter
70 mm
Crankcase must be spindled
nein
Motor housing must be modified
nein
Rotary vane crankshaft
nein
Full cheek crankshaft
ja
Filling material for full cheek
Stahl
Material balancing weights
Aluminium
Diameter of variator stub
14.8 mm
Variomatic stub design
verzahnt
can be used with original variator
ja
Wide crank webs
40 mm
Bearing seat diameter on alternator side
20 mm
Bearing seat diameter on drive side
20 mm
Diameter of sealing ring seat on alternator side
19 mm
Diameter of sealing ring seat on drive side
18 mm
 
Connecting rod
Connecting rod length
80 mm
Connecting rod strength
4 mm
Connecting rod eye top diameter
17 mm
Lifting pin diameter
16 mm
Upper connecting rod eye lubrication hole
ja
Lower connecting rod eye lubrication hole
Schlitz
Connecting rod thrust washers
ja
 
General
EAN
4250366600635
 
OEM numbers (for comparison purposes only)
Scooter Center:
BGM034023
Matching
Accessories