Fan wheel weighing approximately 1.9 kg from the Indian company ELEMEC, which also manufactures the lightweight AF fan wheels. The build quality could be better. Compared to the original weight of 2.6 kg, the ELEMEC flywheel offers better acceleration. Since it isn’t too light, it runs smoothly, and the idle speed can be set to a manageable level.
It is recommended to protect the bare steel on the outside of the pole wheel with paint to prevent rust. In addition, it is essential to check the contact pattern between the pole wheel’s cone and the crankshaft. To do this, simply mark the crankshaft cone with paint, then firmly attach the pole wheel and turn it by hand. The paint film on the crankshaft should be removed evenly. If this is not the case, use valve lapping compound to lap the parts together.
DE | €
