Carburator -DELLORTO / SPACO SI20/20D- Vespa PX125 Euro3 (2011-, type with catalyzer/autolub) - COD 585

carburettor DELLORTO / SPACO SI20/20D Vespa PX125, PX150 Euro3 (2011-, type with catalyst/separate lubrication) - COD 585

• main nozzle: 96
• secondary nozzle: 45140
• mixing tube: BE5
• Main air correction nozzle: 140
• Gas slide: 6823-11

The carburettors of the same series always differ only in their vehicle-specific equipment. However, this can easily be adapted to any new application. For example, a 20/20D can also be modified for operation with a larger cylinder.

separate lubrication
Carburettors for vehicles with separate lubrication can also be used on vehicles without separate lubrication.

TUNING
If a larger cross section is to be used, the SI20/20D carburettors can easily be exchanged for carburettors of the SI24/24E or SI26/26E series.

In both cases, the jetting must be adapted accordingly.

NOTE: All new SI carburettors are manufactured under licence by Spaco in India. These carburettors have been and are used in the series production of Piaggio for a long time. They are of the same quality as the original Dell'Orto carburettors. They also pass the quality assurance at Dell'Orto and are therefore partly also delivered packed in Dell'Orto cartons.