back

Show all articles from: Ignition & alternator

Piaggio Item number: 9010005

Ignition -PIAGGIO stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

7 Ratings

149,00 €*

available immediately

Shipping weight 0,78 kg

Information on product safety

Original PIAGGIO ignition base plate in the usual good original equipment manufacturer quality.

NOTE: Piaggio purchases its goods from different manufacturers in Europe and Asia. The picture material may therefore differ from the delivered goods.

_{AI-translation}

This is how we ensure, that reviews come from real consumers.

Anonym 04/26/2016

eliable and well built, I'm satisfied.

Anonym 04/25/2016

Gutes Produkt, bin zufrieden.

Anonym 04/25/2016

gut

Anonym 09/14/2015

Einbauen, anschließen, fertig. Funktioniert wie es soll. Alles passt.

Anonym 09/14/2015

Einbauen, anschließen, fertig.Funktioniert wie es soll.Alles passt.

Anonym 08/16/2015

Von sehr guter Qualität,

Anonym 11/06/2014

Es war leider defekt

Stator ignition (base plate)

Ignition type

kontaktlos (elektronisch)

Position (pickup / contact)

innenliegend

Stator uses pole wheel type

Außenrotor

Number of coils

5

Tension

12V

Electricity

Wechselstrom (AC)

Base plate diameter

105 mm

Coil diameter

93 mm

Total height

39.5 mm

Number of cables

6

Plug type

Multistecker

Rotor ignition (pole wheel)

Pole wheel type

Außenrotor

Ignition in general

Rotor (pole wheel) included in the scope of delivery

nein

CDI included in scope of delivery

nein

Voltage regulator included in the scope of delivery

nein

Ignition timing

fest

OEM numbers (for comparison purposes only)

Piaggio:

199500

Scooter Center:

9010005

Matching

Accessories

Crimp terminal -male spade connector 6.3mm Ø=1.0-1.5mm²- DIN 46248 - 10 pcs

BGM ORIGINAL
3330392

Crimp terminal -male spade connector 6.3mm Ø=1.0-1.5mm²- DIN 46248 - 10 pcs

Crimp terminal -female spade connector 6.3mm Ø=1.0-1.5mm²- DIN 46340 - 10 pcs

BGM ORIGINAL
3330393

Crimp terminal -female spade connector 6.3mm Ø=1.0-1.5mm²- DIN 46340 - 10 pcs

Crimp terminal - male spade connector 4.8mm Ø=0.5-1.0mm²- DIN 46343 - 10 pcs

BGM ORIGINAL
3330394

Crimp terminal - male spade connector 4.8mm Ø=0.5-1.0mm²- DIN 46343 - 10 pcs

Crimp terminal -female spade connector 4.8mm Ø=0.5-1.0mm²- DIN 46247 - 10 pcs

BGM ORIGINAL
3330395

Crimp terminal -female spade connector 4.8mm Ø=0.5-1.0mm²- DIN 46247 - 10 pcs

Crimp terminal -bullet plug 4mm Ø=0.5-1.0mm²- 10 pcs

BGM ORIGINAL
3330396

Crimp terminal -bullet plug 4mm Ø=0.5-1.0mm²- 10 pcs

Crimp terminal -bullet socket 4mm Ø=0.5-1.0mm²- 10 pcs

BGM ORIGINAL
3330397

Crimp terminal -bullet socket 4mm Ø=0.5-1.0mm²- 10 pcs

Crimp terminal -ring tongue M3 (3.5mm) Ø=0.5-1.0mm²- 10 pcs

BGM ORIGINAL
3330398

Crimp terminal -ring tongue M3 (3.5mm) Ø=0.5-1.0mm²- 10 pcs

Crimp terminal -ring tongue 4.5mm Ø=1.0-1.5mm²- 10 pcs

BGM ORIGINAL
3330399

Crimp terminal -ring tongue 4.5mm Ø=1.0-1.5mm²- 10 pcs

Crimp terminal -ring tongue 5.7mm Ø=1.0-1.5mm²- 10 pcs

BGM ORIGINAL
3330400

Crimp terminal -ring tongue 5.7mm Ø=1.0-1.5mm²- 10 pcs

Crimp terminal -ring tongue 6.5mm Ø=1.0-1.5mm²- 10 pcs

BGM ORIGINAL
3330401

Crimp terminal -ring tongue 6.5mm Ø=1.0-1.5mm²- 10 pcs

Digital multimeter-CTM-23 Eco- 2V-250V- with acustic continuity tester

OEM-Qualität
3330660

Digital multimeter-CTM-23 Eco- 2V-250V- with acustic continuity tester

Digital multimeter -CTM-43 Big 2V-600V- with rubber holster, acustic continuity tester and hold function

OEM-Qualität
3330707

Digital multimeter -CTM-43 Big 2V-600V- with rubber holster, acustic continuity tester and hold function

Washer -DIN 9021- M5 x 15 x1,2mm - used for stator V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK50 HP, PK50 SS, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS125

Normfest
4940072U

Washer -DIN 9021- M5 x 15 x1,2mm - used for stator V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK50 HP, PK50 SS, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS125

Plug for stator wires -PIAGGIO- Vespa PK - 6-pin - female plug

Piaggio
7671801

Plug for stator wires -PIAGGIO- Vespa PK - 6-pin - female plug

Plug for stator wires -PIAGGIO- Vespa PK - 6-pin - male plug

Piaggio
7671802

Plug for stator wires -PIAGGIO- Vespa PK - 6-pin - male plug

Crimp terminal - male spade connector 2.8mm Ø=0.5-1.0mm²- DIN 46244 - 10 pcs

BGM ORIGINAL
7675164

Crimp terminal - male spade connector 2.8mm Ø=0.5-1.0mm²- DIN 46244 - 10 pcs

Crimp terminal -female spade connector 2.8mm Ø=0.5-1.0mm²- DIN 18201 - 10 pcs

BGM ORIGINAL
7675165

Crimp terminal -female spade connector 2.8mm Ø=0.5-1.0mm²- DIN 18201 - 10 pcs

Steel shims set for pick-up coil -BGM ORIGINAL- Vespa PX, PK XL, Cosa, Lambretta (electronic ignition) - 3x 0,5mm

BGM ORIGINAL
BGM8000S05

Steel shims set for pick-up coil -BGM ORIGINAL- Vespa PX, PK XL, Cosa, Lambretta (electronic ignition) - 3x 0,5mm

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Matching

Alternative products

Ignition -AEL stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Ignition -AEL stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Ignition -101 OCTANE stator - Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

101 Octane
IP35647

Ignition -101 OCTANE stator - Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Ignition -AEL stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

AEL

Ignition -AEL stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Ignition -101 OCTANE stator - Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

101 Octane

101 Octane
IP35647

Ignition -101 OCTANE stator - Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Matching

Customers also bought

Cylinder -POLINI cast iron 75 ccm Sport- Vespa V50, PK50

Cylinder -POLINI cast iron 75 ccm Sport- Vespa V50, PK50

Exhaust -POLINI Sport banana- Vespa PK50/PK80 S/XL

Exhaust -POLINI Sport banana- Vespa PK50/PK80 S/XL

Air filter -POLINI- Vespa V50, PV125, PK50, PK80, PK125 (Dellorto PHBL 24-25mm)

Air filter -POLINI- Vespa V50, PV125, PK50, PK80, PK125 (Dellorto PHBL 24-25mm)

Center stand rubbers -OEM QUALITY Ø=22mm- Vespa PX, Cosa, Cosa, T5 125cc, PK - black

OEM-Qualität
1050041

Center stand rubbers -OEM QUALITY Ø=22mm- Vespa PX, Cosa, Cosa, T5 125cc, PK - black

Speedo bulb (festoon) holder (plastic) -OEM QUALITY- Vespa 50SS, 90SS, PV125, ET3, GTR125, TS125, Sprint150 Veloce, Rally180, Rally200

OEM-Qualität
1100998

Speedo bulb (festoon) holder (plastic) -OEM QUALITY- Vespa 50SS, 90SS, PV125, ET3, GTR125, TS125, Sprint150 Veloce, Rally180, Rally200

Rivet Ø=4x10mm for steering lock cover type NEIMAN (oval) -OEM QUALITY- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), Super, GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), SS180 (VSC1T), SS50, SS90, V50 SR

OEM-Qualität
1152099

Rivet Ø=4x10mm for steering lock cover type NEIMAN (oval) -OEM QUALITY- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), Super, GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), SS180 (VSC1T), SS50, SS90, V50 SR

Corrugated washer Ø 8mm / 4,2 mm -OEM QUALITY- used for steering lock cover - rivet Ø=4x10mm

OEM-Qualität
1152099W

Corrugated washer Ø 8mm / 4,2 mm -OEM QUALITY- used for steering lock cover - rivet Ø=4x10mm

Grommet frame/gear change, clutch cable -CIF- Vespa V50, V90, PV, ET3

Grommet frame/gear change, clutch cable -CIF- Vespa V50, V90, PV, ET3

Clutch cable -PIAGGIO- Ape 50 (TL5T), Ape P 50 (TL6T), Ape 50 MIX (ZAPC80000)

Piaggio
1B007702

Clutch cable -PIAGGIO- Ape 50 (TL5T), Ape P 50 (TL6T), Ape 50 MIX (ZAPC80000)

Exhaust -SITO PLUS- Vespa PK50/PK80 S/XL

Exhaust -SITO PLUS- Vespa PK50/PK80 S/XL

Fuel tap -OEM QUALITY- Vespa PX (-1984)

OEM-Qualität
2529090

Fuel tap -OEM QUALITY- Vespa PX (-1984)

Cable choke adapter -DELLORTO- PHBH, PHBL, VHSA, VHSB

Dellorto
2599091

Cable choke adapter -DELLORTO- PHBH, PHBL, VHSA, VHSB

Ignition -PIAGGIO stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Ignition -PIAGGIO stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery

Ignition -PIAGGIO stator- Vespa PK XL - 5 coils, 8-cable (round connector with 5-pin) - for vehicles with battery