back

Show all articles from: Intake manifold & diaphragm

Malossi Item number: M2013801

Intake manifold incl. reed valve bloc -MALOSSI MHR X360 Ø30mm, Ø35mm- MinarelliI AM3-AM6, Derbi D50B0, D50B1, EBE050, EBS050, Keeway KW1E40QMB-2, Aprilia MX50, RS50, RX50, SX50, Tuono50, Derbi Senda50, GPR50, Peugeot XPS50, XR6, XR7, Rieju RS50, Yamaha TZ

86,00 €*

available immediately

Shipping weight 0,22 kg

Information on product safety

Also fits on the early (two-piece) Malossi membrane intake manifolds for Vespa Largeframe.
_{AI-translation}

OEM numbers (for comparison purposes only)

Malossi:

2013801, M2013801

Matching

Accessories

Threadlock -NORMFEST V12- semi strength (similar Loctite 243) - 24ml

Normfest
3330758

Threadlock -NORMFEST V12- semi strength (similar Loctite 243) - 24ml

Liquid gasket -CORTECO Evo300- +250°C - 70ml

Corteco
3332471

Liquid gasket -CORTECO Evo300- +250°C - 70ml

Liquid gasket -LOXEAL silicone (59-30) +300°C - 75ml

Liquid gasket -LOXEAL silicone (59-30) +300°C - 75ml

Liquid gasket -WÜRTH Silikon Spezial- 70 ml

Liquid gasket -WÜRTH Silikon Spezial- 70 ml

Threadlock -LOCTITE 243- semi strength- 10ml

Loctite
3600015

Threadlock -LOCTITE 243- semi strength- 10ml

Threadlock -WEICON 30243- semi strength - 10ml

Threadlock -WEICON 30243- semi strength - 10ml

Matching

Customers also bought

Idle jet set -BGM PRO for KEIHIN (type: N424-21) PWK- (35-58) - (35-38-40-42-45-48-50-52-55-58)

BGM PRO
2599100

Idle jet set -BGM PRO for KEIHIN (type: N424-21) PWK- (35-58) - (35-38-40-42-45-48-50-52-55-58)

Carburetor -KEIHIN PWK 28 manual choke - ØI=28mm, AW=34mm - adjusting screws right

Keihin
KH280000

Carburetor -KEIHIN PWK 28 manual choke - ØI=28mm, AW=34mm - adjusting screws right

Intake manifold -MALOSSI X360 BONNEVILL C-One/RC-One, AM6- Piaggio 2-stroke - CS=40.2mm

Malossi
M2017669

Intake manifold -MALOSSI X360 BONNEVILL C-One/RC-One, AM6- Piaggio 2-stroke - CS=40.2mm

Secondary gears -MALOSSI- Piaggio 50cc (1998-)- 14/47 = 1:3.36

Malossi
M679968

Secondary gears -MALOSSI- Piaggio 50cc (1998-)- 14/47 = 1:3.36

Bell mouth -POLINI- Ø = 50,5x62mm, L = 18mm, PWK 24-28

Polini
P2031506

Bell mouth -POLINI- Ø = 50,5x62mm, L = 18mm, PWK 24-28

Intake manifold incl. reed valve bloc -MALOSSI MHR X360 Ø30mm, Ø35mm- MinarelliI AM3-AM6, Derbi D50B0, D50B1, EBE050, EBS050, Keeway KW1E40QMB-2, Aprilia MX50, RS50, RX50, SX50, Tuono50, Derbi Senda50, GPR50, Peugeot XPS50, XR6, XR7, Rieju RS50, Yamaha TZ