back

Show all articles from: Screws & small parts

Fabbri Racing Item number: FR00654

Nut for crankshaft -FABBRI RACING- Vespa Smallframe

5,81 €* ~~8,90 €~~

34.76 %

available immediately

Shipping weight 0,014 kg

Information on product safety

Nut for crankshaft -FABBRI RACING- Vespa Smallframe

Rate this article now and let us know what you think.

Rate this product now

OEM numbers (for comparison purposes only)

Fabbri Racing:

FR0104

Matching

Accessories

Liquid gasket -LOCTITE omniVISC® 1050- 90g

Loctite
3600017

Liquid gasket -LOCTITE omniVISC® 1050- 90g

Torque wrench -TOPTUL 1/4 5-25 Nm-

Toptul
ANAM0803

Torque wrench -TOPTUL 1/4 5-25 Nm-

Combination wrench set -TOPTUL Hi-Performance- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24mm - 16 pcs

Toptul
GAAD1603

Combination wrench set -TOPTUL Hi-Performance- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24mm - 16 pcs

Ratchet set -TOPTUL 1/4- 4mm-13mm - 17 pcs

Toptul
GCAD1702

Ratchet set -TOPTUL 1/4- 4mm-13mm - 17 pcs

Ball bearing -6005 C3- (25x47x12mm) - (used for crankshaft Fabbri and conversion to ETS) Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL)

Ball bearing -6005 C3- (25x47x12mm) - (used for crankshaft Fabbri and conversion to ETS) Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL)

Oil seal 27x47x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa PX (-1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint (since 1972), TS (since 1972), GT125 (since 1972), GTR125 (since 1972), GL150 (VLA1T) (since 1972)), crankshaft

BGM PRO
BGM1043

Oil seal 27x47x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa PX (-1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint (since 1972), TS (since 1972), GT125 (since 1972), GTR125 (since 1972), GL150 (VLA1T) (since 1972)), crankshaft

Engine gasket set -ATHENA Aluminium, rubber coated- Vespa Smallframe 50-125cc, V50, 50N, PV, ET3, PK S, PK XL, PK XL2/FL - incl. O-rings, felt rings

Engine gasket set -ATHENA Aluminium, rubber coated- Vespa Smallframe 50-125cc, V50, 50N, PV, ET3, PK S, PK XL, PK XL2/FL - incl. O-rings, felt rings

Engine gasket set -BGM Pro silicone- Vespa Smallframe, V50, V90, V100, PV125, ET3, PK50-125/S/XL/XL2, ETS, incl. O-rings

BGM PRO
BGM1214

Engine gasket set -BGM Pro silicone- Vespa Smallframe, V50, V90, V100, PV125, ET3, PK50-125/S/XL/XL2, ETS, incl. O-rings

Ball bearing -6204 C3- (20x47x14mm)

Piaggio
GP833701

Ball bearing -6204 C3- (20x47x14mm)

Ball bearing -6204 C4- (20x47x14mm) - (used for drive shaft Vespa Smallframe, Largeframe (Vespa V50, PV125, ET3, PK, PX, T5 125cc, Cosa, Rally, Sprint, TS, GT, GTR, Super, VNB, VBB, VBA, GL), crankshaft Smallframe stator side (Vespa V50, PV125, ET3, PK),

Ball bearing -6204 C4- (20x47x14mm) - (used for drive shaft Vespa Smallframe, Largeframe (Vespa V50, PV125, ET3, PK, PX, T5 125cc, Cosa, Rally, Sprint, TS, GT, GTR, Super, VNB, VBB, VBA, GL), crankshaft Smallframe stator side (Vespa V50, PV125, ET3, PK),

Ball bearing -6204 C5- (20x47x14mm) - used for crankshaft Smallframe flywheel side (Vespa V50, PV125, ET3, PK)

Ball bearing -6204 C5- (20x47x14mm) - used for crankshaft Smallframe flywheel side (Vespa V50, PV125, ET3, PK)

Ball bearing -6204 TN9 C4- (20x47x14mm) - (used for crankshaft Minarelli 50cc (type MA, MY, CW, CA, CY), Vespa V50, V90, PV125, ET3, PK S, PK XL (flywheel side))

Ball bearing -6204 TN9 C4- (20x47x14mm) - (used for crankshaft Minarelli 50cc (type MA, MY, CW, CA, CY), Vespa V50, V90, PV125, ET3, PK S, PK XL (flywheel side))

Ball bearing -6204- (20x47x14mm) - (used for drive shaft Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T))

Ball bearing -6204- (20x47x14mm) - (used for drive shaft Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T))

Oil seal 27x37x7mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180

BGM PRO
BGM1048

Oil seal 27x37x7mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180

Oil seal 27x37x7mm -CORTECO NBR- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180

Corteco
3810005

Oil seal 27x37x7mm -CORTECO NBR- (used for rear hub Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL, PK XL2, ETS, GT125, GTR125, Sprint, TS, GL150, VBA, VBB, VNA, VNB, Rally180

Woodruff key -FABBRI RACING hardened- Vespa Smallframe V50, PV, ET3, PK - suitable for pole wheel, primary, clutch

Fabbri Racing
FR0034

Woodruff key -FABBRI RACING hardened- Vespa Smallframe V50, PV, ET3, PK - suitable for pole wheel, primary, clutch

Stud bolt set -FABBRI RACING- M7 x 160mm, high-strength steel, rolled thread, spanner flat 6mm incl. brass nut set- used for cylinder Vespa V90, PV125, ET3, PK80, PK125 (for crankshaft stroke=54mm)

Fabbri Racing
FR0001

Stud bolt set -FABBRI RACING- M7 x 160mm, high-strength steel, rolled thread, spanner flat 6mm incl. brass nut set- used for cylinder Vespa V90, PV125, ET3, PK80, PK125 (for crankshaft stroke=54mm)

Intake manifold - for reed valve -POLINI 2-stud reed valve- Vespa V50, PV125 - CS=28.5mm (Dell'Orto PHBL24, Polini CP24 )

Intake manifold - for reed valve -POLINI 2-stud reed valve- Vespa V50, PV125 - CS=28.5mm (Dell'Orto PHBL24, Polini CP24 )

Intake manifold - Diaphragm intake manifold -MRP for RD/RZ350 reed and carburettor Ø30mm- Vespa V50, PV125, ET3, PK S, PK XL, PK XL2. ETS - AW=35mm - suitable for 2- and 3-hole smallframe engine cases

Intake manifold - Diaphragm intake manifold -MRP for RD/RZ350 reed and carburettor Ø30mm- Vespa V50, PV125, ET3, PK S, PK XL, PK XL2. ETS - AW=35mm - suitable for 2- and 3-hole smallframe engine cases

Clutch spider -FABBRI RACING FB45- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Fabbri Racing
FR0007

Clutch spider -FABBRI RACING FB45- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Clutch lining set incl. discs -FABBRI RACING FB 36, FB 24 EVO (cork linings + duralumin discs)- Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 4-discs

Fabbri Racing
FR0009

Clutch lining set incl. discs -FABBRI RACING FB 36, FB 24 EVO (cork linings + duralumin discs)- Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 4-discs

Clutch basket with primary repair kit -FABBRI RACING, performance CNC- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Fabbri Racing
FR0021

Clutch basket with primary repair kit -FABBRI RACING, performance CNC- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Clutch -FABBRI RACING FB45- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Fabbri Racing
FR0031

Clutch -FABBRI RACING FB45- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Delivery date

Spring set for clutch -FABBRI RACING top r (XXXL)- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 16 pcs

Fabbri Racing
FR0033

Spring set for clutch -FABBRI RACING top r (XXXL)- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 16 pcs

Delivery date

Primary drive -FABBRI RACING reinforced- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 24-72 = 3.00 (straight teeth)

Fabbri Racing
FR0056

Primary drive -FABBRI RACING reinforced- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 24-72 = 3.00 (straight teeth)

Delivery date

Primary gear ratio -FABBRI RACING performance- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 27-69 = 2.56 (straight toothed)

Fabbri Racing
FR0057

Primary gear ratio -FABBRI RACING performance- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 27-69 = 2.56 (straight toothed)

Clutch -FABBRI RACING FB36- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Fabbri Racing
FR0073

Clutch -FABBRI RACING FB36- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Gear 1 -FABBRI RACING, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T from no. 69444), Special (V5B3T from no. 94315), Elestart (V5B4T from no. 1514), PV125 (VMA2T from no. 150203), ET3 (VMB1T from no. 8161) - 55 teeth (extra long, +3)

Fabbri Racing
FR0087

Gear 1 -FABBRI RACING, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T from no. 69444), Special (V5B3T from no. 94315), Elestart (V5B4T from no. 1514), PV125 (VMA2T from no. 150203), ET3 (VMB1T from no. 8161) - 55 teeth (extra long, +3)

Delivery date

Gear 2 -FABBRI RACING, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T from no. 69444), Special (V5B3T from no. 94315), Elestart (V5B4T from no. 1514), PV125 (VMA2T from no. 150203), ET3 (VMB1T from no. 8161) - 53 teeth (long +1)

Fabbri Racing
FR0088

Gear 2 -FABBRI RACING, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T from no. 69444), Special (V5B3T from no. 94315), Elestart (V5B4T from no. 1514), PV125 (VMA2T from no. 150203), ET3 (VMB1T from no. 8161) - 53 teeth (long +1)

Gear 3 -FABBRI RACING, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T from no. 69444), Special (V5B3T from no. 94315), Elestart (V5B4T from no. 1514), PV125 (VMA2T from no. 150203), ET3 (VMB1T from no. 8161) - 50 teeth (std)

Fabbri Racing
FR0089

Gear 3 -FABBRI RACING, 4-speed gearbox- Vespa PK S, PK XL1, PK XL2, ETS, V50 (V5A1T from no. 69444), Special (V5B3T from no. 94315), Elestart (V5B4T from no. 1514), PV125 (VMA2T from no. 150203), ET3 (VMB1T from no. 8161) - 50 teeth (std)

Gear cluster set incl. 4th gear with 47 teeth -FABBRI RACING Triangular/Polygon- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL/XL2 - 10-14-17-19 teeth

Fabbri Racing
FR0090

Gear cluster set incl. 4th gear with 47 teeth -FABBRI RACING Triangular/Polygon- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL/XL2 - 10-14-17-19 teeth

Delivery date

Clutch spider -FABBRI RACING FB45 for Triangular/Polygon auxiliary shaft- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Fabbri Racing
FR0093

Clutch spider -FABBRI RACING FB45 for Triangular/Polygon auxiliary shaft- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Delivery date

Clutch spider -FABBRI RACING FB5r for triangular/polygon auxiliary shaft and FB5r 5-disc clutch- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Fabbri Racing
FR0094

Clutch spider -FABBRI RACING FB5r for triangular/polygon auxiliary shaft and FB5r 5-disc clutch- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Delivery date

PTO shafts -FABBRI RACING- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL/XL2 - 10-14-17-20 teeth - can be used with original gearbox, short fourth gear

Fabbri Racing
FR0139

PTO shafts -FABBRI RACING- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL/XL2 - 10-14-17-20 teeth - can be used with original gearbox, short fourth gear

Silentblock engine -FABBRI RACING Blue, stainless steel/polyurethane, 60 sha (Shore) for engine case Piaggio for Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL

Fabbri Racing
FR0246

Silentblock engine -FABBRI RACING Blue, stainless steel/polyurethane, 60 sha (Shore) for engine case Piaggio for Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL

Delivery date

Matching

Alternative products

Crankshaft -FABBRI RACING (connecting rod primatist, for diaphragm intake, cheeks=Ø87mm, fits only with spindles) full cheek 51mm stroke, 97mm connecting rod- Conversion shaft Vespa PK50 XL/XL2 to 125cc (Ø 20mm cone)

Fabbri Racing

Fabbri Racing
FR0101

Crankshaft -FABBRI RACING (connecting rod primatist, for diaphragm intake, cheeks=Ø87mm, fits only with spindles) full cheek 51mm stroke, 97mm connecting rod- Conversion shaft Vespa PK50 XL/XL2 to 125cc (Ø 20mm cone)

Matching

Customers also bought

Hydraulic brake hose banjo -SPIEGLER- black - 0°

Spiegler
3331246

Hydraulic brake hose banjo -SPIEGLER- black - 0°

Hydraulic brake hose banjo -SPIEGLER- black - 90°

Spiegler
3331247

Hydraulic brake hose banjo -SPIEGLER- black - 90°

Hydraulic brake hose banjo -SPIEGLER- black - direct connection (M10 x 1,0)

Spiegler
3331248

Hydraulic brake hose banjo -SPIEGLER- black - direct connection (M10 x 1,0)

Brake hose -SPIEGLER MODULAR (without fittings)- Vespa, Lambretta - blue - 1200mm

Spiegler
3331252A

Brake hose -SPIEGLER MODULAR (without fittings)- Vespa, Lambretta - blue - 1200mm

Delivery date

Idle jet -BGM PRO (type: 9892) SI- 62-160 (2.58)

BGM PRO
3331622

Idle jet -BGM PRO (type: 9892) SI- 62-160 (2.58)

Delivery date

Gasket for hydraulic brake hose banjo -DIN 7603- A10 x 16 - aluminium

Normfest
5900012

Gasket for hydraulic brake hose banjo -DIN 7603- A10 x 16 - aluminium

Cylinder cover -BSK- Vespa PX200, (for Quattrini M232 and M244 cylinders, VMC244 Explorer)

Cylinder cover -BSK- Vespa PX200, (for Quattrini M232 and M244 cylinders, VMC244 Explorer)

Nut M12 x1.25 WS=19 flat type (used for crankshaft drive side CPI / Morini)

Normfest
7673769

Nut M12 x1.25 WS=19 flat type (used for crankshaft drive side CPI / Morini)

O-ring 18x3mm fork link/fork (internal) -VESPA- PX (-1982)

Piaggio
9020130

O-ring 18x3mm fork link/fork (internal) -VESPA- PX (-1982)

Swingarm bearing set -BGM ORIGINAL- Vespa PX Lusso (1984-, V8X1T, VLX1T, VNX1T, VNX2T, VSX1T, ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), T5 125 (VNX5T), Cosa 125-200 (VSR1T, VNR1T, VNR2T), PK 50 (V5X1T), PK 50 XL2 automatic (VA52T

BGM ORIGINAL
BGM7920

Swingarm bearing set -BGM ORIGINAL- Vespa PX Lusso (1984-, V8X1T, VLX1T, VNX1T, VNX2T, VSX1T, ZAPM09, ZAPM18, ZAPM50, ZAPM51, ZAPM74), T5 125 (VNX5T), Cosa 125-200 (VSR1T, VNR1T, VNR2T), PK 50 (V5X1T), PK 50 XL2 automatic (VA52T

Tuning set for SI carburettor with Venturi -BGM PRO 140-160 - main jet set, secondary jet, mixing tube, main air correction jet

BGM PRO
BGM177NEV

Tuning set for SI carburettor with Venturi -BGM PRO 140-160 - main jet set, secondary jet, mixing tube, main air correction jet

%

Nut for crankshaft -FABBRI RACING- Vespa Smallframe

Nut for crankshaft -FABBRI RACING- Vespa Smallframe

Nut for crankshaft -FABBRI RACING- Vespa Smallframe