GOL Item number: GL591
GOL
66,00 €*
available immediately
Shipping weight 0,23 kg

Piston - VESPA Nose piston- Vespa 150 cc from 1959 year of manufacture

Replacement piston for the 150ccm cylinders of the Vespa models VBA, VBB, VGLA, VGLB -
57mm is the standard dimension.
Nose pistons are used in cross-flow scavenged two-stroke engines to keep the fresh gas flow away from the open exhaust. The nose sits on the piston crown and deflects the gas flow upward. The inlet cross-section can be larger than in cross-flow scavenged engines with flat pistons. Nose pistons also cannot prevent fresh gas from escaping into the exhaust at all loads and speeds, and they cause an unfavorable combustion chamber shape. After reverse scavenging was developed in the 1920s, cross-scavenged engines became less important.

TIP: Always install piston rings carefully. Piston rings made of cast material are only elastic to a limited extent and break relatively quickly.


(TW180122)

AI-translation

Rate this article now and let us know what you think.
Piston pin
Diameter
15 mm
Length
48.5 mm
 
Cylinder
Drill hole
57 mm
Motor type
2-Takt
 
Piston
Number of piston rings
2
Piston manufacturing method
gegossen
Pin position
außermittig
Compression height
35 mm
Piston roof shape
nasenförmig
 
Piston rings
Piston ring type
Rechteck-Ring
Piston ring thickness
2,5mm
 
Piston clips
Piston clip type
Seeger-Typ
 
OEM numbers (for comparison purposes only)
Scooter Center:
GL591
Matching
Customers also bought