Airbox secondary air with tube -PIAGGIO- Vespa PX from 2011

Tube secondary air exhaust incl. rubbers -PIAGGIO- Vespa PX 2011

Diaphragm secondary air housing -PIAGGIO- all 50cc Hyper2 engines, Vespa PX 2011

Cover secondary air box exhaust -PIAGGIO- Piaggio 50cc hyper2 engines, Vespa PX 2011

Air filter secondary air housing (extern. plug) -PIAGGIO- outer CS Ø 13mm - Vespa PX2011

Rubber connector secondary air housing (filter side) -PIAGGIO- Øouter: 17mm, Øinner = 11mm, l = 45mm - Vespa PX 2011

Rubber secondary air box exhaust (exhaust side) -PIAGGIO- Øouter = 21mm, Øinner = 15mm, l = 48mm - all 50cc Hyper2 engines, Vespa PX 2011

Sealing 78.0x3.3mm -PIAGGIO- Vespa ET2 50 (ZAPC38100), Vespa LX 50 (ZAPC38101, ZAPC38104, ZAPC38400), Vespa LXV 50 (ZAPC38102), Vespa Primavera 50 (ZAPC53200), Vespa PX 125 (ZAPM09302, ZAPM50100, ZAPM74100), Vespa PX 150 (VLX1T, ZAPM51100, ZAPM74200), Ves

Hose clamp cobra type -NORMA- 21x8mm (used also for secondary air housing exhaust)

Air filter (inner) secondary air housing -PIAGGIO- Vespa ET2 50 (ZAPC16000, ZAPC38100), Vespa LX 50 (ZAPC38101, ZAPC38104, ZAPC38400), Vespa LXV 50 (ZAPC38102), Vespa Primavera 50 (ZAPC53200), Vespa PX 125 (ZAPM09302, ZAPM50100, ZAPM74100), Vespa PX 150

Plate -PIAGGIO- M5

Hose clamp Ø=20mm (single ear clamp) -PIAGGIO- used for cooling water hoses and air intake tube

Screw -PIAGGIO- 4x30 self tapping cross head (used for secondary air housing Vespa PX 2011)

Screw -PIAGGIO- M5 x 16mm (used for secondary air housing Vespa PX 2011)

Hose clamp Ø=22.6mm (single ear clamp) -PIAGGIO- used for cooling water hoses