Hose clamp Ø=22.6mm (single ear clamp) -PIAGGIO- used for cooling water hoses

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Voltage regulator -8-Pin 12V incl. flasher relay- Piaggio/ Gilera 50 cc 2-stroke (carburator models, since 1998), Vespa S, LX, LXV, Sprint 50, Primavera 50, ET4 125ccm (ZAPM04000 till 1998), Aprilia Mojito Retro 125 ccm (ZD4PM Piaggio Engine)

Carburettor gasket set -DELLORTO- PHVA

Spark plug -NGK BR ES- BR9ES

Grommet oil hose connection -OEM- Aprilia SR 50, DiTech, Amico, Area 51, Gulliver, Rally, Scarabeo 50, Scarabeo 100, Sonic - used as anti-knik protection

Fuel hose -CIF- fabric reinfoced- Ø inner = 5mm, Ø outer = 10mm, l= 1,000mm 1m

Float -DELLORTO- PHBN, PHVA, PHVB - including float needle

Tube -CONTINENTAL D10 10 inch- 3.00-10, 3.50-10, 4.00-10, 90/90-10, 100/90-10, 120/90-10, 130/90-10, 100/80-10, 110/80-10 - Valve position Vespa

V-belt -PIAGGIO (724x17.5mm)- Piaggio 50cc (-1998) short casing

Hose clamp Ø=29.6mm (single ear clamp) -PIAGGIO- used for cooling water hoses

exhaust stud bolt set -NARAKU- incl. nuts - M6x32mm

Oil tube -PIAGGIO- Ø inner = 4mm, Ø outer = 10mm, l= 450mm