Intake funnel -VESPTEC- for carburettor SI 24/24 connection= Ø24mm

Small series of 3D printed intake funnels from Vesptec, manufactured in Germany. The funnel replaces the standard air filter.

• FDM 3D printed part

• Material ASA

Latest version of the Vesptec intake funnels. These have a higher design, all openings have been reduced to the bare minimum. The nozzle holders are concealed, the fastening screw is inserted from the outside and therefore cannot fall into the intake tract should it come loose.

Please note that the air correction of the standard air filter is omitted. The main air correction nozzle and/or the jetting in general must then be adjusted accordingly.