back
Scooter Center Item number: 7673642
Scooter Center

Carburator kit -MRB Dellorto- 25 Dellorto PHBL Lambretta LI, LIS, SX, TV (Series 2-3), dl, GP - 125-190 cc engines

2 Ratings
 available immediately
Shipping weight 1,289 kg
Information on product safety
The following components are included in this set:
Carburetor -DELLORTO 25mm PHBL BS- AW=30mm
Carburetor -DELLORTO 25mm PHBL BS- AW=30mm
Cable choke adapter -DELLORTO- PHBH, PHBL, VHSA, VHSB
Cable choke adapter -DELLORTO- PHBH, PHBL, VHSA, VHSB
Main jet set -BGM PRO for Dellorto (type: 6413) 6mm- (100-122) - (100-102-105-108-110-112-115-118-120-122)
Main jet set -BGM PRO for Dellorto (type: 6413) 6mm- (100-122) - (100-102-105-108-110-112-115-118-120-122)
Main jet set -BGM PRO for Dellorto (type: 6413) 6mm- (75-98) - (75-78-80-82-85-88-90-92-95-98)
Main jet set -BGM PRO for Dellorto (type: 6413) 6mm- (75-98) - (75-78-80-82-85-88-90-92-95-98)
Main jet set -BGM PRO for Dellorto (type: 1486) 5mm- (50-72) - (50-52-55-58-60-62-65-68-70-72)
Main jet set -BGM PRO for Dellorto (type: 1486) 5mm- (50-72) - (50-52-55-58-60-62-65-68-70-72)
Throttle cable guide set (throttle cable elbow) -MALOSSI- M6 x 0.75 - 160°
Throttle cable guide set (throttle cable elbow) -MALOSSI- M6 x 0.75 - 160°
Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable
Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable
Trunnion -UNIVERSAL- Ø=5.5mm x 7mm (used for throttle cable)
Trunnion -UNIVERSAL- Ø=5.5mm x 7mm (used for throttle cable)
Needle set -BGM PRO- Dellorto PHBL (D22, D24, D26, D27, D28, D29, D30, D31, D32, D33)
Needle set -BGM PRO- Dellorto PHBL (D22, D24, D26, D27, D28, D29, D30, D31, D32, D33)
Intake manifold -MB DEVELOPMENTS Lambretta 125-190cc - CS=30mm
Intake manifold -MB DEVELOPMENTS Lambretta 125-190cc - CS=30mm
Intake manifold gasket -OEM QUALITY- Lambretta LIS 150, TV 175 (series 2-3)
Intake manifold gasket -OEM QUALITY- Lambretta LIS 150, TV 175 (series 2-3)
Hose clamp -UNIVERSAL- 32-50mm - band width = 9mm
2xHose clamp -UNIVERSAL- 32-50mm - band width = 9mm
Carb rubber Carburator/intake manifold -BGM PRO- CS=30/30mm
Carb rubber Carburator/intake manifold -BGM PRO- CS=30/30mm
304,00 € *
Complete carburetor kit for conversion to the Dellorto PHBL 25 carburetor.
Perfect replacement for all old MA or SH or for all tuning applications up to 250ccm. The original air filter box can be kept. To get the maximum performance you can use a so called remote filter system. The original intake hose is kept and supplemented by a Ramair filter.
The carburettor can be tuned much better. The engine runs over the entire speed range as if there was suddenly softener in the tank.
Thanks to the 180° throttle cable guide included in the delivery, the original throttle cable fits. You only have to change the inner cable.
All necessary tuning parts are included in the delivery.
We will gladly give you tips for a starting nozzle for your individual engine. Just send a mail to: lambretta[at]scooter-center.com.

This carburettor kit for the Lambretta engines with the small engine housing of the 125-190ccm class is ideal for all Lambretta riders who want or need to upgrade from the simple SH carburettor to the modern PHBL Dellorto.

The throttle cable should be laid in large radii without kinks for a fluid function.

With the practical nozzle sets and the needle set, engines from the original Li125 up to extremely open racing cylinders can be easily and uncomplicatedly vented.

scope of delivery:

-carburettor Dellorto 25mm PHBL BS AW=30mm

-intake manifold MB DEVELOPMENTS Lambretta 125-190ccm

-carburettor guide set Dellorto

-cable chokeKit Dellorto PHBL

-internal puller universal

-connecting rubber MB DEVELOPMENTS

-hose clamp AW 32-50mm

-carburettor needle set bgm PRO Dellorto PHBL (D22, D24, D26, D27, D28, D29, D30, D31, D32, D33)

-main nozzle set bgm PRO Dellorto 6mm (50-72) for LP range

-main nozzle set bgm PRO Dellorto 5mm (75-98) for HD range

-Main nozzle set bgm PRO Dellorto 5mm (100-122) for HD range

-aspiration port seal Lambretta

-gas cable clamping nipple


AI-translation

This is how we ensure, that reviews come from real consumers.
Anonym  03/18/2015
Anonym  01/22/2016

Carb was decent quality and the additional needles / jets were perfect for the setup.

Rate this product now
Lambretta carb jetting by Scooter Centerpdf
Matching
Spare parts
Matching
Accessories
Matching
Customers also bought
very good 4.7 / 5
Scooter Center
 
Service
Payment and shipping
Article without TÜV and ABE unless otherwise indicated. Delivery times refer to deliveries within Germany.
All rights reserved © 2025 Scooter Center GmbH
Legal matters
* incl. VAT. plus shipping costs