back
Polini Item number: 1010019
Polini

Carburetor kit -POLINI 2-hole, 24mm Dellorto PHBL, reed valve- Vespa PK S

 available immediately
Shipping weight 1,201 kg
Information on product safety
Report error
The following components are included in this set:
Intake manifold - for reed valve -POLINI 2-stud reed valve- Vespa PK S - CS=28.5mm (Dell'Orto PHBL24, Polini CP24 )
Intake manifold - for reed valve -POLINI 2-stud reed valve- Vespa PK S - CS=28.5mm (Dell'Orto PHBL24, Polini CP24 )
Air filter -POLINI- Vespa V50, PV125, PK50, PK80, PK125 (Dellorto PHBL 24-25mm)
Air filter -POLINI- Vespa V50, PV125, PK50, PK80, PK125 (Dellorto PHBL 24-25mm)
Carburator -DELLORTO 24mm PHBL AS- CS=28,6mm
Carburator -DELLORTO 24mm PHBL AS- CS=28,6mm
Cable choke adapter -DELLORTO- PHBH, PHBL, VHSA, VHSB
Cable choke adapter -DELLORTO- PHBH, PHBL, VHSA, VHSB
Throttle cable guide set (throttle cable elbow) -MALOSSI- M6 x 0.75 - 160°
Throttle cable guide set (throttle cable elbow) -MALOSSI- M6 x 0.75 - 160°
Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - laid cable
Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - laid cable
Trunnion -UNIVERSAL- Ø=5.5mm x 7mm (used for throttle cable)
Trunnion -UNIVERSAL- Ø=5.5mm x 7mm (used for throttle cable)
throttle cable coated 180cm -101 OCTANE- universal
throttle cable coated 180cm -101 OCTANE- universal
339,00 € *

POLINI carburetor kit with PHBL 24 mm and reed valve intake for Vespa PK S (2-hole)

Complete kit for quick and easy conversion to reed valve intake. The individual parts are perfectly matched to the respective engine type. The advantage of the diaphragm is that the intake tract can be designed more freely. The intake time is no longer restricted by the rotary valve. This results in significantly more power and torque, especially in the lower and mid-range.
Rate this article now and let us know what you think.
Rate this product now
Matching
Spare parts
Matching
Accessories