bgm PRO Disc Brake with Antidive for Lambretta – Made in Germany
Disc brake with brake torque support (Antidive), manufactured in Germany. This effectively prevents annoying fork dive when braking. This allows you to fully utilise the strong braking power of the disc brake. The Antidive also allows the use of softer fork springs, as these no longer need to compensate for the high brake torque. This significantly improves ride behaviour and comfort. The brake fits original disc brake fork links without modifications. Due to the Antidive support, the use of tyres wider than 3.50-10 is only possible to a limited extent.
Optimum braking performance & improved ride behaviour
The brake disc used has an outer diameter of 220 mm and is fastened with 10 bolts.
The caliper mount is designed for the 4-piston brake calipers of bgm PRO and Stage6.
This achieves very high deceleration values on the Lambretta.
Authentic conversion with SIL brake drum
Thanks to the original SIL brake drum, the conversion is very harmonious. The drum is supplied with all necessary small parts (bearings, oil seals, bushing, etc.). The drum is unpainted. The threads are equipped with steel inserts.
Installation notes & compatibility
The brake is delivered pre-assembled.
Please note during assembly:
- On fork links for drum brakes, remove the pin for the brake torque support.
- The support for the Antidive function must be positioned at a 90° angle to the fork. Ensure sufficient clearance to the tyre.
Note for use with aluminium rims
If using an aluminium tubeless rim, please use the screw set
BGM7890SKT (see Accessories). This set contains longer screws to compensate for the greater material thickness of aluminium rims.