Black anodized dipstick for Vespa GTS, LX, GT0 - CNC quality from BGM PRO

  • Available in silver or black anodized
  • Suitable for all Piaggio Leader/Quasar 125-300cc engines
  • 1:1 replacement for the original plastic dipstick
  • No tools necessary
  • High-quality production (dipstick with thread + high-strength screw adhesive secured in the head)
  • Incl. O-ring
  • Ready for direct installation


ENGINE OIL CHECK
Do not warm up the engine, allow to cool for ~10 minutes if necessary. Place the vehicle on a level surface. Unscrew the dipstick and clean it with a clean cloth. Screw the dipstick back in completely. After unscrewing it again, check whether the oil level is in the area between the two notches screwed in.

The upper notch represents the limit for the maximum fill level. This corresponds to the engine oil filling quantity of 1300 ml and must not be exceeded. The oil level is lower when the engine is warm; if necessary, allow the engine to cool down for 10 minutes and check again.

The lower notch represents the minimum oil level. The difference between the two markings is approx. 200 ml. If the oil level is below the notch, top up the engine with oil accordingly. After a successful check, screw the dipstick back in and tighten it sufficiently

  • Engine oil filling quantity Vespa GTS: ~1300ml
  • Change interval: starting at 1000 km every 10000 km


TIP
: Order the matching BGM PRO gearbox dipstick directly



Rate this article now and let us know what you think.
Matching
Customers also bought