Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Oil seal 30x47x6mm -MALOSSI PTFE/FKM- (used for rear hub Vespa PX (1984-1991), Piaggio 50-180 cc 2-stroke, Piaggio 50-100 cc 4-stroke)

7675886
Oil seal 30x47x6mm -MALOSSI PTFE/FKM- (used for rear hub Vespa PX (1984-1991), Piaggio 50-180 cc 2-stroke, Piaggio 50-100 cc 4-stroke)
Oil seal 30x47x6mm -MALOSSI PTFE/FKM- (used for rear hub Vespa PX (1984-1991), Piaggio 50-180 cc 2-stroke, Piaggio 50-100 cc 4-stroke)

Description


Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names Viton and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).

  • Very low wear
  • Absolutely heat resistant
  • Extremely low frictional resistance
  • Resistant to almost all chemicals
  • Perfectly suitable for heavily tuned engines
  • Also applicable in the series engine

AI-translation

 
€9.65 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
Oil seals
inner diameter: 30
outer diameter: 47
width: 6
sizes: 30x47x6
material: FPM, FKM
coating: PTFE
OEM numbers (for comparison purposes only)
Sonstige M6616199B
Malossi 6616199B
Piaggio 478498
Customers alternatively searched for
Wellendichtring | 30 | 47 | 6 | Simmerring | Dichtring | Dichtung | Wedi | Wellendichtung | Oil | Seal | 30 | 47 | 6 | Joint Spi 30X47X6mm | Paraolio 30X47X6mm | Retén 30X47X6mm | Bourrage |
Malossi uses the best materials for its shaft seals. They consist of steel cores covered with...Continue reading

In exploded views


Recently viewed items