OEM-Qualität Item number: 7675704
OEM-Qualität
available immediately
Shipping weight 0,481 kg
The following components are included in this set:
Grommet speedo cable/hub back plate -PIAGGIO- Vespa V50, V90, PV, ET3
Grommet speedo cable/hub back plate -PIAGGIO- Vespa V50, V90, PV, ET3
Screw -DIN 933- M5 x 10mm (used for speedo drive cover Vespa PX, T5 125cc, V50, PV125, ET3)
Screw -DIN 933- M5 x 10mm (used for speedo drive cover Vespa PX, T5 125cc, V50, PV125, ET3)
Speedo cable securing plate -OEM QUALITY- Vespa V50, PV125, ET3
Speedo cable securing plate -OEM QUALITY- Vespa V50, PV125, ET3
Speedo support -OEM QUALITY- Vespa V50 Ø=48mm
Speedo support -OEM QUALITY- Vespa V50 Ø=48mm
Speedo gasket -IMPORT- Vespa V50 Special (trapeze)
Speedo gasket -IMPORT- Vespa V50 Special (trapeze)
Speedo drive set -BGM ORIGINAL- Vespa 10 teeth, Ø=22,8mm, plastic + 8 teeth, l= 31mm, 2,7mm square, rot (used in Vespa V50, V90, PV125, ET3)
Speedo drive set -BGM ORIGINAL- Vespa 10 teeth, Ø=22,8mm, plastic + 8 teeth, l= 31mm, 2,7mm square, rot (used in Vespa V50, V90, PV125, ET3)
Rubber cap speedo drive -OEM QUALITY- Vespa V50, V90, PV, ET3 - grey
Rubber cap speedo drive -OEM QUALITY- Vespa V50, V90, PV, ET3 - grey
Speedo -IMPORT- Vespa V50 Special - 80km/h
Speedo -IMPORT- Vespa V50 Special - 80km/h
Speedo cable -BGM ORIGINAL- Vespa V50, PV125
Speedo cable -BGM ORIGINAL- Vespa V50, PV125
99,00 € *
This retrofit set allows a fast and cost-effective retrofitting of a speedometer. Many older vehicles were delivered without such a speedometer because it was not required by law.
The set contains all relevant parts needed for the retrofit. For mounting the fork does not have to be removed.


AI-translation

Rate this article now and let us know what you think.
Matching
Customers also bought