Fabbri Racing crankshaft 58 mm – for Quattrini C200 with 115 mm CNC conrod

Crankshaft FABBRI RACING for engine case Quattrini C200

Very high quality racing crankshaft from Fabbri Racing. Suitable for all smallframe engines based on the Quattrini C200 case. This is designed to accept Quattrini's famous M200 and M200S cylinders. These use a 56.5mm stroke crankshaft as standard.
With 58mm stroke and 115mm connecting rod length, the Fabbri Racing crankshaft provides the basis for extremely powerful engines. Thanks to the excellent material quality of the crankshaft, the possible high performance and speeds can also be called up permanently.

The 1.5mm longer stroke is made possible by an increased diameter of the crank webs.
Therefore, it is necessary to adapt the crankcase of the shaft in diameter (so-called ausspindeln).

In combination with the high quality CNC connecting rod from Primatist, continuous power clearly above 40HP is possible without any problems.

  • Stroke: 58mm

  • Connecting rod: CNC from Primatist

  • Connecting rod length: 115mm

  • High quality crank pin and roller bearing

  • Cone: blunt/large

  • Oil seal seat: Ø24mm

CONCLUSION: Very durable race shaft at a fair price


AI-translation

Rate this article now and let us know what you think.
OEM numbers (for comparison purposes only)
Scooter Center:
FR0042
Fabbri Racing:
FR0042
Matching
Accessories