Cylinder cover too short? We have the right Quattrini cylinder cooling cover made of GRP
In the course of our engine project with the
Quattrini M244in collaboration with
GRP specialist BSK a
cylinder cooling cover for the M232 and M244 cylinders. created.
Quattrini cylinder too long for original cylinder cooling cover
The basic design of the M244 cylinder is long. The Piaggio cylinder cover of the Vespa PX200 is simply too short. This, together with the central positioning of the spark plug, makes it difficult to use the original cylinder cooling cover. With a Piaggio cylinder cooling cover, the original opening for the spark plug can be closed with our
matching plugs.
But there is still a lack of the right overall length so that the cylinder cooling cover can be screwed to the engine housing and the fan cover.
The solution: perfectly fitting GRP cylinder cover from BSK
The cylinder cooling cover from BSK is adapted accordingly. The overall length to the fixing points is optimized and the hole for the spark plug is in the right place.
At the point where the cylinder cooling cover is bolted to the spacer nut, the cylinder cooling cover is reinforced with a sturdy washer.
A rigid reinforcement on the screw to the spacer nut ensures that the cylinder cooling cover can be securely and permanently fixed to the cylinder head without the GRP fabric being damaged by the screw. The fan duct is designed to
easily accommodate a
modern intake manifold and a larger carburetor. Also shown here on our
M244 test engine with a 30mm Polini carburettor.
Buy GRP cylinder cover here