Engine case -MALOSSI V-One, rotary valve - Vespa PX80, PX125, PX150, LML Star/Stella 125/150 Elestart

Malossi V-One engine case for Vespa PX80-150 and LML

Malossi offers two new reinforced PX125/150 engine cases, V-One and VR-One.

V-OneROTARY VALVE
The V-One has a rotary valve intake and is aimed at all those who are either looking for a high-quality replacement for an original engine case and/or want to build a powerful but quiet touring engine.

VR-One MEMBRANE INLET
The VR-One, on the other hand, has an intake manifold with a reed valve inlet and is primarily aimed at tuners who value a high power output. The diaphragm inlet is moved further towards the cylinder, which means that full cheek shafts can also be used (the crank cheeks are no longer completely in the way of the gas flow).

Both housing types are already designed for use with a Malossi 177cc Sport or 177/187cc MHR cylinder. The engine housing is already manufactured to fit in the area of the overflow channels, so no further adjustments need to be made. Of course, all other cylinders can also be used on these housings.

The biggest novelty of the Malossi engine housing is the elimination of loose engine bolts and the center gasket made of sealing paper. The housing is now joined together with M8 Allen screws and sealed using temperature-stable sealing compound(tip: anaerobic curing sealing compound from Loctite).

The housings have reinforcements at all neuralgic points (auxiliary shaft, fivefold bolted crankcase, swingarm and shock absorber mount). Extra material has been planned for the sealing surfaces, so tuners can let off steam here to their heart's content.

Pre-assembled silent rubbers on the engine and shock absorber mounts are included with both types.

Special feature: The PX125/150 Malossi engine cases use the large silent rubbers of the 200cc versions.

MALOSSI V-One engine case (M5718392)

• Reinforced engine housing with rotary valve intake
• Can be used as a replacement for an original Piaggio engine housing (original stock dimensions)
• M8 Allen engine bolts
• Stud bolts for cylinder and brake pre-assembled
• Scope of delivery without intake manifold, without bearings

MALOSSI VR-One engine housing (M5718382)

• Reinforced engine housing with reed valve inlet
• incl. diaphragm intake manifold (360° rotatable for carburetors with Ø30-34 mm)
• incl. 6 flaps diaphragm
• M8 hexagon socket engine bolts
• incl. crankshaft bearing (Lima 25x52x15mm / clutch 25x62x12mm)
• Stud bolts for cylinder and brake pre-assembled