Piaggio Item number: 7672413
Piaggio
not available
Shipping weight 1,07 kg
186,90 € *
Complete kit for the big engine revision.
We have taken great care to use only original PIAGGIO spare parts as far as possible. Where these are no longer available, we have used parts that are of OEM quality.
The set consists of

  • 4940010 Switching cross -VESPA Piaggio- PX
  • 7670171 Gasket set motor -PIAGGIO- Vespa PX 80-150
  • 3820010 Oil seal kit -VESPA- PX 80-200
  • 3720006 Ball bearing -6204 2RSH- (20x47x14mm)
  • 3720035 Needle bearing -PIAGGIO-NBI 253815- (25x38x15mm)
  • 3720036 Ball bearing -613912- (25x62x12mm) Piaggio
  • 3720007 Ball bearing -6302- (15x42x13mm)*
  • 3720004 Needle bearing -B188- (29x35x12mm)
  • 3720009 Bearing needle set 2,0x11,8mm auxiliary shaft
  • 3620004 Gearbox oil -RUNGE- Vespa SAE 30 - 250ml
  • 7672424 Clutch lining -PIAGGIO Vespa type 6-spring- 3-disc - external
  • 7672425 Clutch lining -PIAGGIO Vespa type 6-spring- 3-disc - inner
  • 9020085 clutch crown nut
  • 9020084 clutch crown nut cage

  • *Some engines (usually still with contact ignition) still have the transmission type of the Sprint Veloce models. They use a different bearing on the reduction gear. They also use a different type of auxiliary shaft and different auxiliary shaft needles. Since the auxiliary shaft axle in the bearing area of the needles is often worn out (pitting), it should be replaced by a new one. The needles supplied in the set above will fit into this new one. The original Sprint auxiliary shaft axle uses pointed needles which can only be used in the old auxiliary shaft axles. Therefore in case of doubt always order these parts in addition to the kit:

  • 3720026 Ball bearing (12x40x12mm)
  • 0208700 Auxiliary shaft axle Sprint


  • AI-translation

    Rate this article now and let us know what you think.
    Matching
    Spare parts
    Matching
    Customers also bought