Inner tube for handlebar indicators gear change side -VESPARATUR- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T), SS180 (VSC1T), PV125, ET3

Preview: Inner tube for handlebar indicators gear change side -VESPARATUR- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T), SS180 (VSC1T), PV125, ET3

Description

Mounting tubes for handlebar turn signals 'Made in Germany' by VESPARATUR.

Allows the installation of handlebar turn signals of type Hella or MotoNostra LED

Classic handlebar turn signals require for mounting, in vehicles which do not have factory turn signals, so-called inner tubes. These are smaller in diameter, but longer and have the appropriate diameter to accommodate the turn signals. The tubes are inserted into the existing gas / switch pipes in the vehicle. The inner tubes are then secured in the handlebar center with a sheet metal clasp against twisting. This allows the handlebar turn signals to be mounted TÜV compliant.

Produced from seamless drawn tube
Manufactured by means of laser cutting technology
Made in Germany
Hand deburred
Galvanized

On the part of Piaggio these tubes are no longer available. The company VESPARATUR has now reissued them in small series in a fantastic quality.The tubes are made in a German company from seamless drawn tube precisely by laser cutting technology. They are intentionally not slit at the ends (as original). Thus, a perfectly secure fit is guaranteed as the turn signals vary in diameter. If the turn signal can only be inserted very tightly, simply saw the tube longitudinally to a depth of about 20mm.

The tubes always fit in conjunction with the gas / shift cable rollers which are pushed OVER the gas / shift cable tubes.
Not suitable are the throttle/shift cable rollers which are inserted INTO the throttle/shift tubes.

Therefore, if necessary for the conversion still new gas / shift cable rollers are needed.
Here we have by the way also interesting alternatives to the original parts from CMD or MRP.

The tubes fit on the following models:

Vespa Rally180 (VSD1T)

Vespa Rally200 (VSE1T)

Sprint150 (VLB1T)

TS125 (VNL3T)

GT125 (VNL2T)

GTR125 (VNL2T)

Super, GL150 (VLA1T)

SS180 (VSC1T)

PV125 (VMA2T)

ET3 (VMB1T)

Not suitable for V50 or V50 Special

(US)

_{AI-translation}

€35.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Piaggio	1380924, 102588, 137958

Customers alternatively searched for
Lenkerblinkerinnenrohr \| Schaltrohr \| Lenkerblinkerinnenrohr \| Lenkerinnenrohr \| Lenkerrohr \| Lenkerendenblinker \| Lenkerblinker \| Lenkerendblinker \| Lenkerendenblinkerrohr \| Lenkerblinkerrohr \| Lenkerendblinkerrohr \| Hella \| Hellablinker \| Ochsenaugen \| Innenrohr \| Innenhülse \| Blinkerrohr \| Inner \| Tube \| Handlebar \| Indicators \| Gear \| Change \| Side \| Tube Interne Gauche Pour Clignotants De Guidon \| Tubo Frecce Manubrio Sinistra \| Tubo Interior Para Intemediente Izquierdo \| Señalador \| Direccional \|

Customers alternatively searched for