Installation instructions Mounting LED headlight Vespa PX

Vespa PX LED Headlight

In this Vespa tutorial video, we show you how our Vespa PX LED headlight for the Vespa PX is installed. The MOTO NOSTRA HighPower LED headlight can also be installed in other vehicles (Lambretta, Vespa GTS, Sprint, Rally). With the included vehicle-specific frame, installation of the Vespa headlight as e.g. Vespa PX LED headlight is very easy. CONTENT
  1. Installation Vespa PX headlight: 00:08
  2. Electrical part / connection Vespa LED headlight: 01:42
DOWNLOAD PDF

Installation instructions for printing as PDF

WHY AN LED HEADLIGHT ON THE VESPA?

The limit with conventional Bilux bulbs in most scooters is a headlight bulb with 45/45 W. The ignitions, which usually provide 80 W up to max. 120 W, do not deliver more. The luminous intensity measured in lumens lies under 400. The LED headlight features over three times the luminous intensity (1300 lumens). The power consumption is only 20 W. This corresponds to the light output of a conventional 100 watt headlight. This allows for significantly better illumination with the given alternator/power supply. Additionally, more capacity remains for other consumers.

PARTS LIST / STORE

Parts used in this video :
  • LED headlight incl. conversion frame Vespa PX and headlight bracket -MOTO NOSTRA- LED HighPower item number: mn1101kt
  • Ignition switch -VESPA 4-cable- Vespa PX Lusso (from year 1984) item number: 9520133
  • Light switch -GRABOR- Vespa PK125 XL/ETS, Vespa PX Elestart (1984-1998) - 10 cables (DC, models with battery, normally closed) item number: 9520145
  • Rubber flasher relay Vespa PX item number: 3330940

MOTO NOSTRA LED HEADLIGHT!

LED headlight with E9 marking (road approval) and powerful high/low beam. An additional feature is a separately switchable position light. With a diameter of 143mm, it also fits perfectly in the handlebar head of PX and Cosa models as well as in the lamp ring of e.g. Vespa Sprint, GTR and Rally. Vespa Moto Nostra LED High Power LED Headlight

TECHNICAL DATA

Luminous intensity 1300 lumens Voltage: 12 volts DC (direct current) Power consumption: 1.8A/1.3A Power input: 21.5W/15W/1.9W Diameter: Ø143mm Installation depth housing: 54mm (measured from headlight ring without glass curvature) Total depth: 79mm (measured from headlight ring without glass curvature with cable feed)

NOTE

The LED headlight operates exclusively with direct current, thus it requires a battery or another equivalent power source with 12V DC. Operation with an alternating current power source leads to immediate defect.
Autor
Maryzabel Cárdenas Ávila