NEW: Exhaust bgm PRO BigBox TOURING for Vespa PK50 & PK125
A new racing exhaust for Vespa PK has sneaked into our store. Today we present the new Vespa PK exhaust from bgm PRO.
We have two versions:
for Ves paPK50 & PK80 | BGM1050PK Exhaust -BGM PRO BigBox TOURING PK- Vespa PK50, PK80 (S/XL/XL2/HP/SS/Lusso)
for Vespa PK125 & PK75 | BGM1125PK Exhaust -BGM PRO BigBox TOURING PK- Vespa PK125 (S/XL/XL2/ETS), Motovespa PK75 (S/XL/Junior)
The history of this exhaust system lies in the fact that there were no longer any original Piaggio exhausts for the PK 50 models. When developing a new exhaust, we recognized the potential and were able to develop a sports exhaust with an original look, low volume and a significant increase in performance . The bgm PRO quality exhaust is now handmade in Europe and is available immediately: bgm PRO BigBox TOURING Vespa PK
Vespa PK exhaust with more power, discreet appearance & low volume
The bgm PRO exhaust in the TOURING version thus provides the discreet appearance and acoustics of an original Vespa exhaust, combined with a sports exhaust characteristic with high torque and a wide power band. This system was originally designed as a replacement for the original Piaggio exhaust systems that are no longer available. In the meantime, we have developed it into a fully-fledged, modern sports exhaust system. We have attached great importance to good performance with a discreet noise level and a good fit.
Significantly more power
Quiet racing exhaust
Good fit
Original look
High and early torque
Wide rev range
More top speed
Very unobtrusive
Fits without modifications
Handmade in Europe
The bgm PRO Sport TOURING harmonizes very well with a standard engine as well as with classic tuning cylinders such as the
Polini 75-112,
DR75-102 or
Malossi 75-112
Polini 133
Simple installation
The manifold, which is split relatively low down, allows the exhaust body to be removed quickly without having to detach the manifold from the cylinder. The connection is secured by tension springs, making it stable yet quick to release. We recommend increasing the jetting by 2-4 numbers compared to a standard exhaust for safety reasons. SCOPE OF DELIVERY
Exhaust body
Exhaust manifold
Exhaust springs
Gasket cylinder/manifold
Vespa PK exhaust TIP:
Adapt jetting see above.
Apply some heat-resistant sealant (see Exhaust accessories) between the manifold and the exhaust body will keep this area permanently clean.
PK 50 exhaust: Suitable Vespa PK
The PK exhaust fits the following Vespa PK 50 and Vespa PK 80 models:
DE | €
