The bgm PRO Lambretta ignition was one of the first of our bgm products. Now the latest version 4.5 with silicone cable is available: bgm PRO ignition base plate The first sample of the ignition base plate was presented on our stand at the Eurolambretta'07 in Neckarsulm. The base plate of our ignitions is based on the electronic ignition, which was already introduced in 1970 with the Lambretta dl 200 electronic. This Innocenti ignition base plate was later "adapted" by Piaggio for the Vespa. This type of ignition is probably the most widespread model. In direct comparison, the bgm PRO ignition base plate provides an extremely stable ignition spark and maximum light output thanks to the optimized number of windings and wiring.
With version 4.5 of the Lambretta ignition base plate, good things get even better. The good and proven characteristics of our ignition remain and have been optimized in many small details:
120W strong light output thanks to maximum number of windings
Proven exciter coil with copper plate for maximum reliability
Pickup with carbon barrier layer for a clean ignition pulse
Cleanly processed light coils
High-quality soldered joints
Gray and black bougie tube
Sufficient cable length for individual wiring
Optional spacers to adjust the pickup height when used with pole wheels other than the bgm PRO rotor.
New features
Base plate in black
Scale with degree-precise scaling for quick adjustment of the ignition when flashing
Silicone cables: extremely flexible & temperature resistant (-40°C to +250°C).
The alternators are available in AC and DC versions:
DE | €
