Photo box #OpenDaySC 2025.05 - Edition Lambretta
The photobox campaign grows with every #OpenDaySC.
We have received some very interesting stories about the scooters photographed that are worth highlighting. That's why we create blogs for each scooter group.
We always appreciate your participation and hope you enjoy the stories of the #RealScooterists.


Fotobox May 2025


Lambretta Series 2
Herbet Lambretta Hawk Tuah Edition

Hawk Tuah Edition

I bought it as a pile of parts from Markus Fröschen from Aachen 1.5 years ago
After first inspection, the Lambretta was very solid, it was probably painted in azure blue in the 80s, but never assembled.
The license plate from Hamm said that it still had Tüv in 1978 and was deregistered in 1978.
It's a German delivery with Schlote tail light.

Lambretta zusammengebaut

It quickly became clear to me that I would turn it into a metalflake project again, painting is my passion.
I've painted quite a few Lambrettas and Vespas over the last few decades. I painted them all myself in a large hall in Cologne, a kind of "garage paint job", as many English people know it.
My paint dealer in Hagen, Fa Petzoldthen put together a system for me from Custom Creativ. I like the store, the guys have a lot of experience and knowledge.
The professional store for effect paints and car care products.

store

After brainstorming for the paint job, the sheet metal work was done and black basecoat for the flakes was painted. The flakes were then painted onto the black basecoat with a special
carrier paint. Then I masked off with tape what was not painted with candy green. I actually wanted to have scalops on the hoods, but Benno had the idea before me, so I decided on 3 silver flake stripes.

Lackierung

When all this is finished, the candy glaze is painted over it, then another four coats of clearcoat are applied, always with intermediate sanding.

Zwischenschliff

The clearcoat is what creates the effect of the candy green and flake finish.

Flakes

A paint job like this takes three to four weeks, as the paint has to dry again and again before the next coat is applied.
Then wait another week or so before you can put everything together.
Lackierung

The engine is a 186 Mugello cylinder with Vape ignition30cc Dellorto carburetor. All work has been done by myself.
The scooter has been dismantled down to the last screw and rebuilt, many parts come from the Scooter Center or are old parts that have been refurbished. Construction time approx. six months from purchase of the scooter.

Herbert

Lambretta series 1

Lambretta-Serie-1--Kane

Framebreather year of construction 1958

Only one previous owner

Restored. Paintwork done by myself.

Quattrini M210 engine

Greetings Kane and Marcel Schnee

J 50

We bought the bike in 2018 from an old two-wheeler mechanic. Everything in original condition, runs at a top speed of approx. 60 km/h:=)

Last year we installed a Vape ignition installed, since then it starts and runs even better.

Jeanette & Stefan

Lambretta J50 - Stefan

Special 125

Lambretta special 125

Autor
Maryzabel Cárdenas Ávila