New main stand for Vespa
We have developed a new main stand for Vespa. The bgm PRO Soft Stop Vespa main stand no longer hits the floor plate. The stand is available in
galvanized, chrome-plated or black for the classic Vespa Smallframe and for Vespa Largeframe models:
- Main stand -BGMPRO Soft Stop System Ø=20mm- Vespa SmallframeV50, V90, PV125, ET3 - bgm Pro article no.: BGM4961
- Main stand -BGM PRO Soft Stop System- Vespa LargeframeSprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT/GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNB2T to VNB6T, VBB1T to VBB2T, GS160 / GS4 (VSB1T), SS180 (VSC1T) - bgm Pro Item no.: BGM4950
True innovation
It's only a small thing, but it's ingenious: the bgm PRO main stand with Soft Stop System puts an end to main stand feet that hit the floorboard hard. As on the new Vespa PX Lusso models, the kickstand stop is now positioned on the sturdy mounting plates on the central frame tunnel.
The kickstand is ideally stopped here without causing the floor plate to vibrate. This not only makes the noise when folding the kickstand much more pleasant, but the kickstand with Soft Stop technology also protects the frame. Cracks in the floor plate caused by the original main stand are therefore a thing of the past [su_custom_gallery source="media: 70059,70054,70049,70029" limit="100" link="image" width="240" height="200"]
Simple installation, supplied with retaining plates
The Soft Stop main stand is supplied with stand plates. These have additional bumpers against which the main stand rests. This prevents direct contact between the stand tube and the frame and also protects the frame (the original Piaggio stand rubs directly against the painted floor plate!). Longer bolts are required for installation, these are included in the set. The main stand spring and stand feet can of course still be used from the original stand, but these can also be found in the accessories:
Stand feet main stand VespaThere is no longer any reason to use a different stand!