New rectifier for Vespa (horn rectifier) bgm PRO
Vespa rectifier bgm PRO: With the new bgm PRO horn rectifier for Vespa 12V, we finally offer you a replacement for the Piaggio horn rectifiers for Vespa PX and Vespa PK, which have not been available for some time.
Much more than just a replacement for the original rectifier
! The newly developed bgm PRO rectifiers are
availableimmediately . Here are a few highlights:
- Horn rectifier as a replacement for the no longer available PX/PK part.
- Internal cut-off as protection against short circuits
- Integrated relay for LED indicators. (Absolutely load-independent!!)
- USB charging output for cell phone or navigation system
- Made in Germany (Each part is individually tested manually and is supplied with a protocol).
Areas of application of the horn rectifier
The rectifier works in any 12V AC environment and is not limited to Vespa and/or PX/PK. The rectifier is NOT ground-related. This means that the current (via the switch) can be routed to the horn - and the ground of the horn can be connected directly to the scooter frame. Truly load-independent LED flasher relays are hard to find. The integrated relay also works with LEDs that draw significantly less than 1W.
Charging your cell phone or sat nav on the Vespa
Charge your cell phone or sat nav on the go - without the hassle of a battery. Simply connect the charging output of the
rectifier to the USB charging socket (12V) and connect the ground pole of the charging socket to the frame. Your end device is charged here with up to 3A - this is enough for most devices to charge from zero->100% in 60 minutes. (The charging function is switched off while the horn is sounding).
Small design - wide range of applications
The bgm PRO horn rectifier is significantly smaller than the original Piaggio part or its replicas. It can therefore be easily accommodated in 12V conversion conversions of older scooters. With the 12V conversion, nobody has to do without the original horn in favor of a snare.
The bgm PRO horn rectifier at a glance
The BGM Pro horn rectifier is a high-quality replacement part for the discontinued Piaggio horn rectifier for Vespa PK, PX, T5 and Cosa models. It also has an integrated flasher relay for LED indicators and an output for USB sockets.
- Regulated direct current output for the horn (12V DC)
- 12V USB charging output with up to 3A charging power
- 12V flasher relay for LED indicators
- Internal, temporary safety cut-out if more than 2A is demanded at an output
- Each rectifier is tested individually and is supplied with a test report
- Only for 12Volt alternating current (AC) on-board voltage
- Designed and MADE in Germany
In addition to its function as a spare part, the BGM Pro horn rectifier allows you to use a horn instead of a (no longer legal) ratchet (AC horn) on your oldie. While driving, it offers the possibility to charge your navigation system or cell phone most effectively. LED indicators can be connected directly to the rectifier; a conventional indicator relay is no longer required. This makes it a perfect addition to the bgm PRO conversion wiring harness (for conversion to 12V and electronic ignition for Vespa V50, PV, Sprint, Rally, VBB, etc.)
Available in three versions:
- BGM6710KT1 - with adapter cable set for free integration into an existing wiring harness incl. waterproof connector set
- BGM6710KT2 - with connector plug for individual wiring with direct connection to the rectifier
- BGM6710 - Version without connector plug (as a replacement for BGM6710KT1/KT2 or if a plug is already available)
A detailed technical description can be found here:
horn-rectifier-vespa-installation-instructions- NOTE: The rectifier is NOT suitable for charging a 12V battery
Order Vespa rectifier HERE
SC-BLOG: USB double socket illuminated and waterproofSC_Blog: USB socket 12V waterproof
DE | €
