Mazzucchelli Item number: 9130002
Mazzucchelli
165,00 €*
not available
Shipping weight 2,12 kg

Mazzucchelli repro crankshaft for Vespa Rally 200

High quality reproduction of the Vespa Rally 200 crankshaft made by Mazzucchelli.

Very nice reproduction which is a good replacement for finished original parts.
Rate this article now and let us know what you think.
Ball bearing
Dimensions
16x20x20mm
 
Piston pin
Diameter
16 mm
 
Crankshafts
Stroke
57 mm
Thread on alternator side
M12x1,5 Rechtsgewinde
Thread on drive side
M12x1,5 Rechtsgewinde
Crank web diameter
98 mm
Crankcase must be spindled
nein
Motor housing must be modified
nein
Rotary vane crankshaft
ja
Length of rotary vane sealing surface on crank web
215 mm
Vespa PX200 - Control angle short sealing surface (46mm) (°)
162
Vespa PX200 - Control angle long sealing surface (62mm fully mac
181
Full cheek crankshaft
nein
Wide crank webs
40.4 mm
Bearing seat diameter on alternator side
25 mm
Bearing seat width on alternator side
15 mm
Bearing seat diameter on drive side
25 mm
Bearing seat width on drive side
11 mm
Diameter of sealing ring seat on alternator side
24 mm
Wide sealing ring seat on alternator side
9 mm
Diameter of sealing ring seat on drive side
31 mm
Wide sealing ring seat on drive side
8 mm
Length of crankshaft stub on alternator side
39 mm
Length of crankshaft stub on drive side
25 mm
Width over all
146 mm
 
Connecting rod
Connecting rod length
110 mm
Connecting rod strength
6 mm
Connecting rod eye top diameter
20 mm
Lifting pin diameter
22 mm
Upper connecting rod eye lubrication hole
nein
Lower connecting rod eye lubrication hole
Nut
Connecting rod thrust washers
ja
 
OEM numbers (for comparison purposes only)
Piaggio:
131057
Scooter Center:
9130002
Matching
Accessories
Matching
Customers also bought