How to Properly Store Your Vespa & Lambretta for Winter – Here’s How to Get Your Scooter Ready for the Winter Break!

The season is over, temperatures are dropping, and it’s time for your scooter to go into its well-deserved hibernation. But before your Vespa, Lambretta, or automatic scooter disappears into the garage for months, there are a few things you should take care of. After all, properly winterizing your scooter protects it from rust, moisture, old fuel residue, and a dead battery.

With a little preparation, you’ll save yourself unnecessary hassle in the spring and be able to hit the road again right away. We’ll show you, step by step, what’s important when winterizing your scooter and which handy accessories from the Scooter Center shop can help you with the process.

1. Clean your scooter thoroughly—dirt takes a winter break!

Before storing your scooter, you should give it a thorough cleaning. Dirt, dust, insect remains, and—above all—road salt can corrode paint, metal, and other surfaces over time.

Clean your scooter thoroughly, paying special attention to hard-to-reach areas, the undercarriage, the rims, and the engine compartment. Then let everything dry completely. Make sure no moisture remains, especially in corners and crevices.

Plastic and rubber parts also appreciate a little care. They can become brittle or lose their color due to weathering and aging.

MOTUL Shine and Go E10 Kunststoffreiniger und Pflegemittel 400 ml

Our product recommendation: MOTUL Shine & Go E10 – 400 ml

€15.90

Conditions plastic parts, refreshes colors, and leaves a water-repellent protective film. It also conditions rubber parts, keeping them supple.

View product

2. Prepare the Tank and Fuel

Fuel is a particularly important consideration when storing your motorcycle for the winter. Gasoline ages over time and can form deposits due to oxidation. These deposits can accumulate in the carburetor, jets, and fuel lines, causing problems when you start up your bike for the season.

What should you do?

  • If you have a metal tank, it’s a good idea to fill it as much as possible with fresh fuel to prevent condensation and rust.
  • Add a suitable fuel stabilizer.
  • Follow the manufacturer’s dosage and usage instructions.
  • Run the engine as directed in the product instructions so that the stabilized fuel reaches the carburetor and fuel system.

With a plastic tank, rust is of course not an issue. Nevertheless, a fuel stabilizer can still be useful here as well.

MOTOREX Fuel Stabilizer Kraftstoffstabilisator 125 ml

Our product recommendation: MOTOREX Fuel Stabilizer – 125 ml

€10.90

This fuel additive prevents oxidation and the resulting varnish- or rubber-like deposits. Suitable for 2- and 4-stroke gasoline engines with or without a catalytic converter.

View product
Important: For special fuel systems, such as fuel-injected engines or vehicles with sensitive seals, you should also follow the manufacturer’s instructions.

3. Corrosion Protection – Rust Has No Invitation!

Moisture is one of your scooter’s biggest enemies. Classic Vespa and Lambretta models, in particular, have areas where moisture can accumulate. Overlapping panels, seams, cavities, and hard-to-reach areas are especially vulnerable.

A suitable corrosion protection product can make a big difference here. Especially with classic scooters, it’s worth keeping an eye not only on the visible surfaces but also on the hidden areas.

ACF-50 Korrosionsschutzmittel mit Pumpzerstäuber 946 ml

Our product recommendation: ACF-50 Corrosion Protection – 946 ml

€44.90

Originally developed for the aviation industry, this corrosion inhibitor has excellent creeping properties and reaches even hard-to-reach areas. It forms a protective film and helps prevent corrosion.

View Product

ACF-50 is particularly effective for treating seams, cavities, and overlapping sheet metal. The manufacturer recommends reapplying the protection regularly, typically every twelve months.

Caution: Corrosion inhibitors must not come into contact with brake surfaces, tires, or other safety-critical areas.

4. Protect Electrical Components and Moving Parts

Don’t forget about the electrical system when preparing your scooter for winter. Moisture can damage connectors, cables, and contacts. It’s especially worth checking the wiring and ignition system on older scooters.

A suitable silicone spray can help protect certain metal and rubber parts from moisture. It’s suitable for electrical wiring, the ignition system, and hinged joints, among other things.

MOTIP Silikonspray 400 ml

Our product recommendation: MOTIP Silicone Spray – 400 ml

€9.90

The transparent protective film remains flexible from -50 °C to +200 °C and is water-repellent. Ideal for selected metal, rubber, and electrical components.

View Product

Before use, bring the can to room temperature, shake for two minutes, and apply the spray in a thin layer. Be sure to follow the application instructions on the packaging.

Tip: Never spray silicone spray on brakes, tires, or other friction surfaces.

5. Properly Store Your Battery for the Winter

If your scooter has a battery, you should pay special attention to it before the winter break. Long periods of inactivity, in particular, can lead to harmful deep discharge.

It’s best to disconnect the battery and store it in a dry, frost-free place. Alternatively, you can use a suitable charger designed for trickle charging.

Important: Not every charger is suitable for every battery. Therefore, check in advance to make sure it’s compatible with your battery type.

H-TRONIC AL 300Pro Batterieladegerät 2V 6V 12V

Our product recommendation: H-TRONIC AL 300Pro Battery Charger

€16.90

The charger supports 2-, 6-, and 12-volt batteries and is designed for continuous charging. The intelligent electronics automatically regulate the charging current and protect against overcharging.

View product

6. Check the Tires and Park the Scooter Properly

The tires shouldn’t just be left unattended for months on end either. First, check the air pressure and inflate the tires to the recommended level.

If the scooter will be stored for an extended period, it may be a good idea to periodically shift the weight off the tires slightly so they aren’t constantly bearing the load in the same spot. If possible, place the scooter on a suitable repair stand or another stable support. Make sure the vehicle is securely positioned.

LAMPA Mini-Kompressor mit integrierter Taschenlampe

Our product recommendation: LAMPA Mini Compressor with Flashlight

€29.90

This cordless compressor reaches up to 8 bar and is suitable for scooters, motorcycles, bicycles, and cars. The built-in flashlight is a handy extra for the garage.

View product

7. Find the Right Storage Spot and Cover Your Scooter

The ideal winter storage spot is dry, well-ventilated, and as temperature-stable as possible. A garage or a sheltered room is best. Avoid damp basements, poorly ventilated sheds, or places where condensation constantly forms.

If your scooter has to be stored outside, you should definitely use a suitable outdoor cover.

Important: A cover should not only be waterproof but also fit securely and protect the paint. With an outdoor cover, moisture that forms underneath must be able to escape as much as possible. Therefore, a cover should not be pulled over a wet scooter.

CAR-E-COVER Outdoor Premium Abdeckplane XS S für Vespa und Scooter

Our product recommendation: CAR-E-COVER Outdoor XS/S

€55.90

This four-layer premium cover features a waterproof PU film and a soft inner layer that protects the paint. Suitable for classic Vespa models, vintage scooters, and many automatic scooters.

View product
Scooter Center Outdoor Universal Premium Abdeckplane

Our product recommendation: SCOOTER CENTER Outdoor Cover

€29.90

Durable 300D Oxford fabric, UV-resistant, waterproof, and stain-resistant. Features an elastic drawstring, securing straps, a lock opening, and a convenient carrying bag.

View product

8. Maneuvering Aid – So Your Scooter Fits in the Garage

Especially when there are several scooters in the garage or space is tight, maneuvering them can quickly become a hassle. A practical maneuvering aid makes your life easier.

BGM PRO Rangierhilfe für Vespa und Lambretta

Our product recommendation: BGM PRO Maneuvering Aid for Vespa and Lambretta

€75.00

Simply place the scooter on the maneuvering aid using the center stand and easily slide it into the desired position. The galvanized steel construction can support up to 200 kg and is adjustable in width.

View product

Especially handy: With the optional rear-wheel extension kit, you can even turn the scooter in place. Perfect when every centimeter in the garage counts!

9. Final Check Before Winter Storage

Before you lock up the garage, it’s worth taking one last look around. Check to make sure everything is taken care of and that your scooter is safely stored for the coming months.

Your Winter Storage Checklist

  • Scooter thoroughly washed and completely dried
  • Paint, plastic, and rubber parts maintained
  • Fuel tank and fuel prepared with storage duration in mind
  • Fuel stabilizer applied according to the manufacturer’s instructions
  • Apply corrosion protection to vulnerable areas
  • Electrical system and connectors checked
  • Battery disconnected or trickle charge set up
  • Tire pressure checked and adjusted
  • Selected a suitable, dry parking spot
  • Scooter protected with a suitable cover
  • Keys and important documents safely stowed

A good winter prep is half the battle!

A little care and preparation before the winter break pays off. If you thoroughly clean your scooter, properly maintain the fuel and battery, prevent rust, and ensure a dry parking spot, you’ll create the best conditions for a smooth start to the season.

And when the first rays of sunshine appear in the spring, all you have to do is: take off the cover, do a quick technical check, and hit the road!

Of course, you can find all the maintenance and winter storage aids featured here in the Scooter Center online shop.

#realScooteristssince1992

Autor
Tim Juschka