Ball bearing -PINASCO 613912 TN9 (Oversize +Ø0,03mm, 25x62x12mm), 9 balls - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150 / GS3... - crankshaft, flywheel side Sprint, GS150 / GS3 | Bearings | Crankshaft | Engines

Preview: Ball bearing -PINASCO 613912 TN9 (Oversize +Ø0,03mm, 25x62x12mm), 9 balls - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150 / GS3... - crankshaft, flywheel side Sprint, GS150 / GS3

Description

Special ball bearing from Pinasco with polyamide ball cage, 9 balls and an outside diameter with 0.03mm oversize.

Ideal for motor housings with worn or too large bearing seats. Especially the floating bearing in the old engine housings (with two identical crankshaft bearings) is naturally subject to higher wear than the fixed-less bearing of the later PX engine generation.

If the bearing bushes in the housing are worn out, the bearings can be mounted without much effort and without large temperature differences. The crankshaft can then move towards the clutch under load due to the helical teeth of the primary drive, causing the pressure point on the clutch lever to move.

The oversize bearings from Pinasco can solve this problem, but please ensure that the bearings are not heated above 125°C. Otherwise the polyamide cage can be damaged.

_{AI-translation}

This item is currently not available.

€58.95 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Piaggio	097804, 97804
Pinasco	25413019

Please inform me once the product is available again.

Customers alternatively searched for
Kugellager \| Lager \| Kulu \| Kugellager \| Lagersatz \| Kugellagersatz \| Motorlagersatz \| Ball \| Bearing \| Ball Bearing \| Roulement À Billes \| Cuscinetto \| Cojinete \|