back
BGM ORIGINAL Item number: BGM8013KT
BGM ORIGINAL

Clutch friction plate set incl. steel plates -BGM ORIGINAL Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 3 friction plates

10 Ratings
 available immediately
Shipping weight 0,38 kg
Information on product safety
Report error
The following components are included in this set:
Clutch friction plate set -BGM Pro Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 3 plates
Clutch friction plate set -BGM Pro Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 3 plates
Clutch steel plate -BGM ORIGINAL- Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 1.5mm
2.00xClutch steel plate -BGM ORIGINAL- Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 1.5mm
Designbgm PRO clutch steel plates in standard thickness 1.5 mm
Field of applicationDirect replacement for classic 3-disc clutches
Separation behaviorPrecisely flat surface, clean separation of the linings
DosabilityVery good concentricity for finely metered clutch
ProcessingDeburred edges, no reworking necessary
CompatibleSuitable as a replacement for original steel plates in many Vespa clutches
!-->
28,10 € *
The BGM clutch facings are manufactured according to special specifications in order to obtain a high-quality, organic lining mixture. This is both pressure and temperature stable and provides the friction discs with a good grip. This ensures that the full torque is always transmitted to the gearbox and even rapid starts are easily handled.
A clutch equipped with BGM linings separates very cleanly due to the solid lining material. Even with strong clutch springs the BGM facings provide a clear feedback at the clutch lever, because the facing material does not compress as much as that of other manufacturers.

The facings can be used in standard as well as heavily reworked motors.

TIPP: We offer the facings with and without steel discs. Ideally, the steel plates should be replaced directly with the clutch revision. These are often discoloured and distorted, thus preventing the clutch from functioning properly.

As a lubricant for these clutch facings, we recommend BGM Pro Street gear oil (BGM2025, complies with specification API GL-3).


AI-translation

This is how we ensure, that reviews come from real consumers.
Benjamin M. 01/10/2026
Dirk M. 08/24/2025
Michel R. 05/14/2025
Anonym 05/11/2016

super qualität

Anonym 11/22/2015

Klappt alles wieder Super, guter Schaltpunkt.

Anonym 06/03/2015

Die Aussparungen in den Stahlscheiben sind Leider zu klein und passten nicht in den Korb.sonst i.O.

Anonym 01/13/2015

Als Reparaturset. kann ich jedme empfehlen. Sehr gute Qualität

Anonym 01/13/2015

Als eparaturset.kann ich jedme empfehlen.Sehr gute Qualität

Anonym 01/10/2015

Guter Preis.

Anonym 12/10/2014

Top Beläge zum Top Preis!

Clutch (classic)
Clutch disk diameter
110 mm
Number of friction disks
3
Covering material
Kork
Friction disk thickness
2.7 mm
Number of steel disks
2
 
OEM numbers (for comparison purposes only)
Scooter Center:
BGM8013KT
Matching
Spare parts
Matching
Accessories
Matching
Alternative products
Matching
Customers also bought