Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Air intake hose adapter -MRP Dumbo Ø60mm (Keihin PWK 33-38mm, Mikuni TMX 35, Polini 32/34, Dellorto PHBH 28/30, VHSH 30)- Vespa PX, T5, Sprint, Rally, GT, GTR, GL150, Super, VNA, VNB, VBA, VBB

MRP562
€52.50 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
Please inform me once the product is available again.
P For this item you get fidelity point/s
Smart solution from MRP to continue drawing cool air from the frame when using larger gasifiers....Continue reading

Description


Smart solution from MRP to continue drawing cool air from the frame when using larger gasifiers.

The opening in the frame has a size of approx. 60x44mm. The surface is thus equivalent to a carburettor with over Ø50mm cross-section. Thus the suction hose solution offers no loss in performance even on very powerful engines. Due to the cooler intake air, better performance results can be expected under heavy load, which strongly heats up the air otherwise drawn in under the side hood.

Another great advantage is that the frame can also be used as sound insulation. Engines that have been converted to intake control via a diaphragm can drastically minimize the noise level of the intake noise. The frame can also be lined with sound-absorbing material from the inside.

TIP: It is essential to retain/mount the standard plastic moulded part underneath the tank. Otherwise the intake noise from the horn area (frame tunnel opening) is quite loud. In the intake cutout below the front seat attachment, a pipe can also be inserted into the frame. This breaks the sound again and suppresses the medium to low frequency range of the intake noise.

This variant with 60mm outer diameter is suitable for the following carburettors:

  • Keihin PWK 33, 35 and 38
  • Mikuni TMX 35
  • Polini 32 and 34
  • Dell''Orto PHBH 28 and 30
  • Dell''Orto VHSH 30

The tank does not have to be removed for assembly!
The suction hose adapter can be easily mounted from the outside in 5 minutes.

Scope of supply:

  • Suction hose adapter with 60mm outer diameter, black powder-coated
  • Aluminium mounting plate inside and outside
  • Sealing rubber for frame flange
  • Very flexible suction hose with wire spiral, 60mm inside.
  • All screws required for assembly.

(machine-translated)
 

Fits the following vehicles


  • Vespa (Piaggio) P 80 X (V8X1T, -1983)
  • Vespa (Piaggio) PX 80 E FL (V8X1T, 1983-)
  • Vespa (Piaggio) PX 80 E FL Elestart (V8X1T, 1984-1990)
  • Vespa (Piaggio) Vespa 125 (VNA1T)
  • Vespa (Piaggio) Vespa 125 (VNA2T)
  • Vespa (Piaggio) Vespa 125 (VNB1T)
  • Vespa (Piaggio) Vespa 125 (VNB3T)
  • Vespa (Piaggio) Vespa 125 (VNB4T)
  • Vespa (Piaggio) Vespa 125 (VNB5T)
  • Vespa (Piaggio) Vespa 125 (VNB6T)
  • Vespa (Piaggio) Vespa 125 GT (VNL2T)
  • Vespa (Piaggio) P 125 X (VNX1T, -1983)
  • Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
  • Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
  • Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
  • Vespa (Piaggio) Vespa 125 Super (VNC1T)
  • Vespa (Piaggio) PX 125 T5 (VNX5T)
  • Vespa (Piaggio) Vespa 125 TS (VNL3T)
  • Vespa (Piaggio) Vespa 150 (VBA1T)
  • Vespa (Piaggio) Vespa 150 (VBB1T)
  • Vespa (Piaggio) Vespa 150 (VBB2T)
  • Vespa (Piaggio) Vespa 150 GL (VLA1T)
  • Vespa (Piaggio) P 150 X (VLX1T, -1980)
  • Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983)
  • Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
  • Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)
  • Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-)
  • Vespa (Piaggio) Vespa 150 Super (VBC1T)
  • Vespa (Piaggio) P 200 E (VSX1T, -1980)
  • Vespa (Piaggio) PX 200 E (VSX1T, 1981-1983)
  • Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
  • Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
  • Vespa (Piaggio) Vespa 200 Rally (VSE1T, Ducati)
  • Vespa (Piaggio) Vespa 200 Rally (VSE1T, Femsa)
Read, edit and discuss reviews...Continue reading

Ratings


20 Jan 2018

very good happy

Customers who bought this item also bought


Gearbox oil -BGM PRO STREET- Vespa SAE30 API GL 3- 250ml Gearbox oil -BGM PRO STREET- Vespa SAE30 API GL...
Unit 0.25 l (€15.96 * / 1 l)
€3.99 *
Cover for wheel nut / brake drum Ø=36mm -OEM QUALITY rear- Vespa PX (1984-), T5 125cc, Cosa - black Cover for wheel nut / brake drum Ø=36mm -OEM...
Unit 10 pc. (€0.29 * / 1 pc.)
€2.90 *

Other customers also viewed the following items


Gearbox oil -BGM PRO STREET- Vespa SAE30 API GL 3- 250ml Gearbox oil -BGM PRO STREET- Vespa SAE30 API GL...
Unit 0.25 l (€15.96 * / 1 l)
€3.99 *
Bell mouth -BGM - Bell mouth -BGM -
from €7.90 *
Recently viewed items