Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburator mounting screw M7, wrench size=11mm -BGM PRO- Vespa PX (since 1984), T5 125cc, Cosa

BGM2255
Carburator mounting screw M7, wrench size=11mm -BGM PRO- Vespa PX (since 1984), T5 125cc, Cosa
Carburator mounting screw M7, wrench size=11mm -BGM PRO- Vespa PX (since 1984), T5 125cc, Cosa
Carburator mounting screw M7, wrench size=11mm -BGM PRO- Vespa PX (since 1984), T5 125cc, Cosa
Carburator mounting screw M7, wrench size=11mm -BGM PRO- Vespa PX (since 1984), T5 125cc, Cosa

Description


Shaft screw BGM PRO Vespa Largeframe for fixing carburettor SI20/SI24/SI26

New type of screw from BGM PRO with practical hexagonal head

  • Replaces the traditional hexagon socket screw for fixing the carburettor of Vespa PX models from 1984 onwards (PX Lusso, My, 2011, Cosa)

  • Fits also for mounting a Malossi/Polini/Pinasco rotary slide intake manifold

  • Can also be used as a replacement for the studs/nuts used to mount the carburetor on the earlier Vespa Largeframe models with rotary slide intake. These are among others the engines of the models VNB, VBA, VBB, VNC, VBC, Sprint, Rally, GT, GTR, TS, GL

ADVANTAGES OF THE BGM PRO SHAFT BOLT:

  • HEXAGON HEAD INSTEAD OF IMBUS

    The BGM PRO shaft screw has a conventional hexagonal head with wrench size 11. This means that the screw can be operated with the same tool as is used on the rest of the engine (M7 with SW=11). This eliminates the hexagon socket as Piaggio used it originally on the vehicles from about 1984.
    This makes the BGM PRO shaft screw much more practical in the workshop.
    Due to the slightly slimmer head, the screw also fits the aftermarket intake manifolds from Polini, Malossi or Pinasco.

  • SHORTER SHAFT LENGTH
    The BGM PRO socket screw has not only a better screw head but also a minimally reduced screw-in length. This makes it much safer to use than the hexagon socket screw from Piaggio.
    The BGM PRO shaft screw protects the rotary valve sealing surface, which is located directly below the screw-in thread in the engine block. If one of the two washers is forgotten with the original Piaggio screw, the end of the screw exerts pressure on the sealing surface. With the approx.1.5mm shorter BGM PRO screw you are always on the safe side.

(US11621)

AI-translation

 
€8.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Piaggio 239265, E.8333, E8333
Customers alternatively searched for
Schaftschraube | Innensechskant | Vergaserbefestigungsschraube | M7 | Vergaserbefestigungsschraube | Vergasermutter | Befestiungsmutter | Befestigungsschraube | Spezialmutter | Si | Mutter | Vergaserwannenmutter | Vergaserschraube | Si | Schraube | Vergaserwannenschraube | Carburator | Mounting | Screw | Carburettor | Carburetor | Carb | Vis De Fixation De Carburateur M7 | Vite Fissaggio Carburatore M7 | Tornillo Fijación Carburador M7 |
Shaft screw BGM PRO Vespa Largeframe for fixing carburettor SI20/SI24/SI26 New type of screw...Continue reading

Fits the following vehicles


Alternative items


Carburator mounting screw M7 -VESPA- PX (since 1984), T5 125cc, Cosa
Piaggio
5250041
Piaggio
Carburator mounting screw M7 -VESPA- PX (since 1984), T5 125cc, Cosa
Available immediately (delivery time 1-3 working days*)
€9.90 *
*incl. VAT plus shipping costs
Recently viewed items