Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,30mm (+0,0 /- 0,04mm)

BGM6020S23
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,30mm (+0,0 /- 0,04mm)
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,30mm (+0,0 /- 0,04mm)

Description


BGM gearbox shoulder rings are manufactured with high precision. They are hardened and plane-parallel ground to an accuracy of a hundredth of a millimetre. Thus they correspond exactly to the specified dimensions. Quality assurance guarantees a maximum deviation of only four hundredths of a millimetre undersize. This makes BGM discs much more precise than Piaggio shoulder rings.

WOFÜR
shoulder rings are used to compensate for the axial play between the gang wheels. The spacing of the gear wheels is essential for a cleanly working shift. The closer the clearance is chosen, the less the gears can slip sideways. The gear change becomes more precise because the shift paddle engages exactly in the middle of the gear wheel and does not push it away. It is therefore worthwhile to measure the gearbox precisely.

WIEVIEL
The play specified by Piaggio is 0.15-0.40mm. It is determined with a feeler gauge between gear wheel and shoulder ring.

  • thick (2.0-2.5mm original with only one nose) suitable for Vespa Largeframe from 1952-1984
  • thin (0.9-1,4mm with four noses) suitable for Vespa Smallframe and Vespa Largeframe from 1984 onwards (main shaft with two shoulder rings/sea rings)

OLDIES
The thick version of the shoulder rings for Largeframe Vespas before 1984 has not been available from Piaggio for quite some time. Thanks to bgm PRO, the matching shoulder rings in the range of 2mm to 2.50mm are now finally available again for these transmissions.
As a deviation from the original, they have, like the more stable Vespa PX Lusso version, 4 lugs for locking. The knock off of the single nose is therefore no longer possible in the new design.

TIP: The exact determination of the play between the gearwheels is only possible with a feeler gauge (see accessories). Do not forget a new BGM Pro shifting cross and the gear oil.


AI-translation

 
This item is currently not available.
€8.54 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

Estimated delivery date: 30/06/2022

P For this item you get fidelity point/s
Please inform me once the product is available again.
Customers alternatively searched for
Schulterring | Ausgleichscheibe | Gangräder | Gangrad | Distanz | Distanzscheibe | Schulterscheibe | Gangscheibe | Getriebe | Gearbox | Shim | Cale D'Épaisseur De Boite | Cambio Spessore | Disco espaciador caja de cambios | arandela piñones cambio | anillo distanciador cambio | arandela de ajuste | arandela distanciadora de reglaje para grupo engranajes | anillo ajuste cambio |

Available versions

Part no.: Thickness Price Stock Cart Save
Part no.: BGM6020S20 Thickness 2.00mm Price
€7.75
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
Part no.: BGM6020S21 Thickness 2.10mm Price
€8.95
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
Part no.: BGM6020S22 Thickness 2.20mm Price
€8.95
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
Part no.: BGM6020S23 Thickness 2.30mm Price
€8.54
Stock
The item is ordered and will be in stock soon
Cart
Save
Part no.: BGM6020S24 Thickness 2.40mm Price
€8.54
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
Part no.: BGM6020S25 Thickness 2.50mm Price
€8.65
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
BGM gearbox shoulder rings are manufactured with high precision. They are hardened and...Continue reading

Fits the following vehicles


Alternative items


Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,00mm (+0,0 /- 0,04mm)
variants bgm Original
BGM6020S20
bgm Original
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,00mm (+0,0 /- 0,04mm)
2 further versions from €7.75
  • Available immediately (delivery time 1-3 working days*)
    2.00mm
  • Available immediately (delivery time 1-3 working days*)
    2.10mm
  • Available immediately (delivery time 1-3 working days*)
    2.20mm
  • The item is ordered and will be in stock soon
    2.30mm
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,10mm (+0,0 /- 0,04mm)
variants bgm Original
BGM6020S21
bgm Original
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,10mm (+0,0 /- 0,04mm)
2 further versions from €7.75
  • Available immediately (delivery time 1-3 working days*)
    2.00mm
  • Available immediately (delivery time 1-3 working days*)
    2.10mm
  • Available immediately (delivery time 1-3 working days*)
    2.20mm
  • The item is ordered and will be in stock soon
    2.30mm
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,20mm (+0,0 /- 0,04mm)
variants bgm Original
BGM6020S22
bgm Original
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,20mm (+0,0 /- 0,04mm)
2 further versions from €7.75
  • Available immediately (delivery time 1-3 working days*)
    2.00mm
  • Available immediately (delivery time 1-3 working days*)
    2.10mm
  • Available immediately (delivery time 1-3 working days*)
    2.20mm
  • The item is ordered and will be in stock soon
    2.30mm
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,40mm (+0,0 /- 0,04mm)
variants bgm Original
BGM6020S24
bgm Original
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,40mm (+0,0 /- 0,04mm)
2 further versions from €7.75
  • Available immediately (delivery time 1-3 working days*)
    2.00mm
  • Available immediately (delivery time 1-3 working days*)
    2.10mm
  • Available immediately (delivery time 1-3 working days*)
    2.20mm
  • The item is ordered and will be in stock soon
    2.30mm
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,50mm (+0,0 /- 0,04mm)
variants bgm Original
BGM6020S25
bgm Original
Gearbox shim -BGM ORIGINAL- Vespa Largeframe VNA, VNB, VBA, VBB, GL, Sprint, GT, GTR, TS, Rally, PX (-1984) - 2,50mm (+0,0 /- 0,04mm)
2 further versions from €7.75
  • Available immediately (delivery time 1-3 working days*)
    2.00mm
  • Available immediately (delivery time 1-3 working days*)
    2.10mm
  • Available immediately (delivery time 1-3 working days*)
    2.20mm
  • The item is ordered and will be in stock soon
    2.30mm
Recently viewed items