Throttle cable guide -DELLORTO- M6 x 0.75 - 0° - used for carburator top cap PHBL, PHBH, PHBE, carburettor box/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa

Adjuster screw -PIAGGIO- M6 x 14mm - (Øinner=6.9mm, thread pitch 0.75, used for carburettor box/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa)

Cable adjuster M6 x 14mm - (Øinner=6.7mm, thread pitch 0.75) with locknut- (used for carburettor box/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa)

Cable adjuster M6 x 25mm - (Øinner=7mm, thread pitch 0.75) -MB DEVELOPMENTS- stainless steel

Slide spring -DELLORTO- SHBC 19

Spring carburettor slide Dellorto SH18, SH20, SH22 --JOCKEYS BOXENSTOP- Lambretta

Nut for throttle lever -PIAGGIO- SHB - WS=8

Nut -DELLORTO- SHB - WS=7 - used for fixing air filter

Nut set M4 for air filter SHB carburetor -BGM original- Vespa V50, Primavera, ET3

Spring washer, waved -DIN 137 steel, glavanised- M4 (used for screw oil pump Vespa PX EFL, 98, My, 2011, T5 125cc, Cosa)

Spring washer, waved -DIN 137 steel, glavanised- M5

Washer -DIN 125- M4

Serrated lock washer -DIN 6798- M5

Lock washer 90° -DIN 6797- M5 (used for handle bar top screws Lambretta LI, LIS, SX, TV, DL, GP)

Screw -DIN 933- M6 x 20mm (8.8 tensile strength)

Screw -DIN 933- M6 x 16mm

Screw -DIN 933- M7 x 20mm (8.8 tensile strength)

Hex socket cap screw -ISO 4762- M6 x 20 (class 8.8)

Screw -DIN 931- M6 x 25mm (8.8 tensile strength) - (used for clutch cover Vespa PX, Cosa, T5 125ccm, Rally, Sprint, TS, GT, GTR, GL, SS 180, GS 160, VBA, VBB, VNA, VNB)

Screw with flansh -M6 x 20mm- -PIAGGIO-

Allen screw flat head -ISO 7380- M6 x 20mm (stiffness 10.9) - (used for brake disc Piaggio, Gilera)

Allen screw flat head -ISO 7380- M6 x 20 - stainless steel

Screw -DIN 933- M6 x 25mm (8.8 tensile strength)